Refreshed 2016 Triumph Tiger Sport debuts in the UK. (more…)
Refreshed 2016 Triumph Tiger Sport debuts in the UK. (more…)
New and revised 2016 Triumph Speed shows its metal in new promotional video. (more…)
New MV Agusta Brutale 675 slated for debut sometime in the second quarter of this year. (more…)
Triumph has introduced a special ‘Black’ edition version of its Street Triple Rx model in the UK. (more…)
The famed Hinckley-based brand first got its ball rolling when it introduced the fully revamped Triumph Bonneville range towards the end of October, followed by the refreshed Speed Triple model just weeks before EICMA 2015 opened its doors.
Now, the firm is strengthening itself further for 2016 after it introduced the refreshed range-topping Triumph Explorer model for 2016. This mid-life refresher sees the flagship dual-sport gaining with a series of new kit and features, with much of the updates mirroring what Triumph did with the smaller Tiger 800 range last year indeed.
For 2016, the Triumph Tiger Explorer will be available in six variants altogether – XC, XCx, XCa, XR, XRx and XRt. The range is separated simply by the fact that the XR range is optimised more for road and street whilst the XC line-up boasts more off-road optimisation instead.
All six models share the same 1,215cc inline three-cylinder 12-valve powerplant; all of which standing rather unique in the class thanks largely to the cylinder configuration it boasts, along with the shaft-drive layout as well. The looming Euro4 legislation prompted Triumph to update the Explorer’s engine in order for it to be compliant in two fronts of said legislation: emissions and noise.
Triumph remains rather coy about the mechanical changes, but sources online report that the powertrain has received a completely new exhaust system accompanied by a larger new catalytic converter, ride-by-wire software, as well as a hike in both power and torque figures too.
Like the smaller Tiger 800 range that was updated for 2015, the 2016 Tiger Explorer gains with a host of tech upgrades aimed at improved stability and control. These include Triumph’s first ever semi-active suspension primed in all but the two base XR and XC variants, followed by other features such as cornering ABS and traction control, four selectable pre-set rider modes available plus an additional fifth riding mode which riders can tailor to their own settings.
Also updated is the ABS system with entry-level models offering switchable ABS and traction control whilst the remaining four models gaining further with the aforementioned advanced cornering ABS and traction control suites. These four models are also further primed with an Inertial Measurement Unit (IMU), which uses an array of sensors to measure five axes of movement: including lean angle, acceleration and deceleration ensuring the traction control and ABS suites are at their most optimal level of performance. There is also the option of a Hill Hold Control (HHC) feature that electronically holds the brakes on to stabilise the bike during hill start.
Other notable changes here include a mild exterior styling revamp, the presence of heated grips and seat, an adjustable windscreen, plus a rich choice of luggage as well. Overall, Triumph have indeed granted its flagship dual-sport adventure bike with a much more complete package for 2016, allowing it to stack up well against new and improved rivals such as the new Ducati Multistrada Enduro.
Sources: Asphaltandrubber / Visordown / MCN
Though it was revealed fully in a ‘teaser’ video not too long ago, MV did not release much facts and details surrounding its refreshed naked bike until its official presentation in the show.
Firstly, the newly updated and Euro4-compliant engine now churns out 116hp at 11,500rpm whilst peak torque has risen by 25% as well to 82.6Nm at 7,600rpm. Besides that, the Brutale 800’s slipper clutch has been updated with a new hydraulically-operated unit whilst gearshifts are now handled by MV’s electronic quick-shifter that works in both up- and down-shifts.
The bike still uses MV’s MVICS electronics package that includes a ride-by-wire throttle and eight setting traction control system.
Calling the new Brutale 800 ‘the most beautiful Brutale ever’, MV says it is ‘more muscular and streamlined’ when explaining the naked bike’s lightly refreshed styling. Highlights here include the sculpted tank and seat unit, as well as the restyled plastic panels at the side of the radiator.
Check our more photos of the refreshed MV Agusta Brutale 800 in the gallery we’ve prepared below.
Sources: Asphaltandrubber / Visordown
With the reveal, Yamaha further added that this custom is hinting at its newest model based on the MT-09 that will debut at EICMA 2015 this month.
Back to this RSD special, it joins the Yamaha brand’s range of Yard Built custom machineries that are usually followed closely by production model. This RSD-built special follows the footsteps of Shinya Kimura’s Faster Son custom concept (the XSR700 preview) and the Deus Eau Rouge (XJR1300 Racer preview), and it now charts a new chapter in the Yamaha Faster Sons trilogy.
It is plain to see that the Roland Sands Yamaha MT-09 Faster Wasp is more than just a tribute to the famed black and yellow speed-block donned on Kenny Roberts Senior’s legendary TZ750 race bike. Underneath the bespoke aluminium bodywork and is the MT-09’s acclaimed 847cc in-line triple and lightweight aluminium frame. Also exclusive to the Wasp are a whole host of cycle-part updates that are not found on any production model.
Being an RSD creation, it sports plenty of the design firm’s signature elements and traits. These include the hand-fabricated aluminium petrol tank, tail section, intake scoops, radiator covers, front number board and front mudguard fender. The custom also sports a prototype Clarity timing cover, rearsets, rear brake reservoir and case guards, plus chain guard, timing plug, axle sliders and fuel cap.
Sources believe most of these will likely be available as official, or RSD, accessories for the incoming new Yamaha model. Other notable bits and pieces include the Wasp’s forged aluminium wheels, Two Bros Racing stainless steel header with an RSD Slant muffler, Renthal sprockets, Performance Machine radial brake calipers, an RSD radial brake master cylinder and Spiegler brake lines, as well as a custom leather seat is made by the Bitchin Seat Co.
Also primed are a set of RSD Nostalgia handlebar risers plus Renthal Fatbar handlebars with RSD Traction grips. The chassis is further enhanced too thanks to Öhlins fork cartridge kit and rear shock tasked at providing better bike control.
You can check out more of the Roland Sands Yamaha MT-09 Faster Wasp in the video we’ve attached at the top or by browsing the extensive gallery we’ve prepared below.
Roland Sands Design Yamaha MT-09 Faster Wasp
Sources: YouTube, MCN and Visordown
We’ve already seen spyshots and reported of the possible updates the new Speed Triple would get, and the result is this heavily revised version for 2016. Firstly, the new models carries new Speed Triple S and Speed Triple R naming schemes for 2016.
Crucially, both versions retain the outgoing model’s chassis but does gain with an extensive update package revolving around its on board electronics and powertrain. Complementing that are a host of mild cosmetic enhancements comprised of sleeker bodywork inspired from the Daytona 675R and a new seat design as well.
For the 2016 model, the Speed Triple gains with a revised 1,050cc triple-cylinder heart that boasts 104 new development. It now offers more power and torque across its entire rev range with fuel efficiency improved by 10%. Highlights here are a new combustion chamber and cylinder head, new machined crank, redesigned pistons and the adoption of new ride-by-wire throttle bodies.
The engine and radiator has been narrowed down in size too with Triumph says grants the entire package with a 20mm narrower standover. Other new bits include a slipper clutch, a smaller new radiator, as well as a revised exhaust system that Triumph claims to have an improved flow rate of 70%.
Triumph has yet to release the official power and torque figures, but sources believe the 2016 Triumph Speed Triple’s revised heart will have at least 140hp.
Perhaps the biggest improvement incorporated in the 2016 Speed Triple is its heavily revamped electronics suite. The update primes the 2016 model with a new ECU and an adjustable ride-by-wire throttle with changeable throttle maps. As a result, the new bike now offers five selectable riding modes: Road, Rain, Sport, Track and a Custom rider-programmable mode. Next up comes the uprated ABS and Traction Control suites that grants riders with selectable levels with both being linked to the riding modes as well.
Updates with the chassis hardware are mild, but there are several notable new bits starting with Brembo monobloc calipers. Next up comes the full compliment of Öhlins suspension all round exclusively for the Speed Triple R, which is comprised of the brand’s NIX30 front forks and TTX36 rear shock.
Also exclusive to the Speed Triple R are several unique and racy exterior trims. These include a carbon-fibre front mudguard, carbon tank inserts and a bellypan. Completing its premium racy looks, the R also boasts new billet-machined bar clamps and risers, swingarm pivot covers and rear wheel finisher, plus a red radiator cowls and a red subframe.
Completing the update are a set of new colour schemes starting with the Speed Triple S model’s ‘Diablo Red’ and ‘Phantom Black’ followed by the R’s ‘Crystal White’ and ‘Matt Graphite’.
We can expect more details surrounding the revised 2016 Triumph Speed Triple range as soon as they make their public debuts at the annual EICMA show in Milan, Italy later this month.
Sources: Asphaltandrubber, Visordown and MorBikes
© Copyright – BikesRepublic.com 2023 Trademarks belong to their respective owners. All rights reserved