Bikesrepublic

BMW Motorrad

  • We were given the honour to cover the 8 Hours of Sepang FIM EWC race from inside the BMW Motorrad World Endurance Team.

  • We had an unprecedented access to what made them tick and the strategies involved.

  • The team finished third overall.

Excitement fills the air as the bikes were fired up for 8 Hours of Sepang FIM Endurance World Championship (FIM EWC) race.

As adrenaline started coursing through the veins of the BMW Motorrad World Endurance Team members, their cheerful disposition gave way to steely stares and clenched jaws. It’s time to go racing.

The Planned Start

A technician pushed the BMW S 1000 RR onto the pitlane with rider Ilya Mikhalchik following closely behind. As he reached for the started button, I braced myself as if squeezing my ear canals in anticipation of an exhaust blast. But… nothing… there was a slight roar from the titanium Akrapovic exhaust silencer but that was it. No eardrum assaulting, chest punching roar.

Read: Up close with the BMW S 1000 RR FIM EWC racebike

And away he went along with other riders. The technicians grabbed their equipment and hurried to the gate to the grid. By then, the first riders had completed their warm-up lap.

When the bikes returned to the grid, they were wheeled backwards and parked against the pitwall at an angle. The riders then went to the other side of the start finish straight. The factory BMW sat in fifth while the crew blanketed the rain Dunlop tyres with warmers again.

Alas, the rain started coming down in earnest with just 25 minutes before the start.

The Safety and Medical Cars were sent out to check but it was visible that the sheer volume of water had overwhelmed the drainage. The cars sent up huge plumes of spray.

By then there was a delay in starting the race and the field was given another sighting lap. The riders roared away in a whiteout wall of spray. Back in the pit, the team had their eyes transfixed on the TV monitors.

The riders tip-toed through every corner and there was still lots of standing water including at the apexes of Turns 5, 9, 13 and 14. There was a river-like puddle running across the track at the braking area for Turn 15.

Upon reaching the start/finish line, marshals instructed the riders to their bikes, away from the where they were supposed to start running from. A few minutes later, race direction suspended the start. Team managers were then called to the briefing room at 1:15pm. We feared the worst i.e. outright cancellation, but that decision never came.

Now, the long wait began.

The BMW Motorrad World Endurance crew didn’t look agitated, but they didn’t seem relaxed, either.

We waited.

This is how the stripped down BMW S 1000 RR endurance racebike looks like

The 1st Restart

The rain began abated somewhat by 2:30 pm. At 2:40 pm, a message flashed across all monitors at the track: PITLANE OPENS FOR 2 MINUTES AT 3:05 PM.

Yes! We’re finally going racing. As per endurance racing rules, the duration was shortened to 6 hours.

However, there was no Le Mans style start. Instead, the riders were flagged off one by one by a marshal holding the Jalur Gemilang (Malaysian flag). Again, a wall of spray hung in the air as the bikes made their way to Turn 1. Also this time, they had to follow the Safety Car (SC).

Photo credit FIM EWC

The spectators in the grandstands were excited. Kids who’ve been running around suddenly sat ran back to their parents’ arms and pointed excitedly at the track.

The SC took the grid past the finish line for Lap 1. There was still too much spray. They went past for Lap 2. Then Lap 3, Lap 4, everyone in the pits was hoping for the SC to turn off its emergency lights. It would mean that it would peel into the pits and let racing commence.

All teams began to prepare for the eventual pitstop by placing tools, axle stands, refueling rigs near the pit entrance. They also place spareparts and assemblies such as front ends, rear subframes, bodywork, radiators, etc. where they are within easy reach (in case of crashes or breakdowns).

The refueling can was placed nearby together with a large fire extinguisher. The refueling man’s helmet and Nomex gloves were placed on top of the fuel can. There’s no time to rush back into the pits for something!

Sadly, the SC never turned off it lights and pulled in at the end of Lap 8. The red flags went out signaling another race suspension.

Another team managers meeting was called at 5.00 pm. BMW Motorrad World Endurance Team’s manager Werner Daemen ran up the steps again to the briefing room.

The organizers, stewards and teams deliberated for more than an hour before coming to the decision to either race or suspend it outright. However, should they choose to restart, the race has to end at 9.00 pm.

Sources told us that the teams were eager to go on and it’ll be a shame to cancel since they had travelled so far for this race. It would’ve been 8 Hours of Rain if it were cancelled.

The 2nd Restart

Soon, the message RACE TO RESUME AT 6.00 PM appeared on the monitors. Mechanics rushed to the holding area to pick up their bikes. They were pushed back to outside the pits and parked on the “hot pit lane” (the red line) and waited for the signal from Race Direction.

At the sound of the air horn, mechanics rushed their bikes into their respective pits to begin working on them.

Why such ruling? So that everyone starts working on their bike from the same time as everyone else. No handicap.

The team mechanics jumped in to change the rear sprocket for a taller gearing, fresh wet tyres were installed. They gave the bike a one-over to make sure everything was alright.

The pit reopened at exactly 6.00 pm and every single person at the track was eager to see the race get going. The field first formed up behind the Safety Car and the riders must be in their qualifying order before the car turns off its warning lights to let the 50 riders loose.

Finally, it was time to race after a couple of laps behind the SC. The 8 Hours of Sepang was go.

By the end of the first restarted lap, it was Mike Di Meglio of F.C.C. TSR Honda (#5) who was challenging Michael Van Der Mark from the Yamaha Sepang Racing Team (#21) for the lead.

The #37 bike of the BMW Motorrad World Endurance Team was in sixth at the end of the same lap, in a pack of four bikes including the Tecmas Racing #9 BMW S 1000 RR (older model). The Tecmas team’s pit neighbor’s the Motorrad’s pit.

Soon, a fierce battle developed up front between #5 and #21, as if it was the last few laps of a WorldSBK race.

The rain had stopped by the 4h 15 minute mark, but the track was still wet.

But neither leading rider backed down and they were pushing so hard that their bikes squirmed under hard braking. That frenetic racing saw a pace that no one else on the field could or want to match. While most of the field was lapping in the 2m 30s bracket, the dueling duo was circulating around in 2m 15s.

Meanwhile, #37 and #9 were locked in a battle of their own, and the former was briefly in fourth by the 4h 40 minute mark. The team members were glued to the TV monitors, a few mini-hopping up and down, a few chewed their fingernails.

Then it happened. V.D. Mark outbraked Di Meglio into Turn 15, but he went wide. Seeing the gap, Di Meglio stuck his bike up the inside. As V.D. Mark tried to tighten his line for the exit, he was surprised to find #5 there and lifted his #21 bike. Di Meglio was also surprised by the move and probably dabbed his front brake and lost the front tyre, which slid into #21’s rear tyre. It sent both men skidding off the track.

You can watch the video >>> HERE <<<

A huge roar went up all around the circuit and in the pits.

Di Meglio managed to pick up his bike first and continued racing, while V.D. Mark’s Yamaha was heavily damaged and had to return to his pit.

To give you an idea of how far they were ahead, Di Meglio rejoined the race in first place.

Into the Night

At the same time, #9 got the better of #37 and the latter dropped back to sixth. But four laps later, there was huge plume of white smoke leading into Turn 1. #9’s engine had gone bang in spectacular fashion. Peeking into our neighbours’ pit saw them slumped into their chairs. One of the crew members had told me during the start that they’re using Michelin tyres and gave the thumbs up. Michelin makes arguably the best rain tyres.

The Safety Car was called into action as the track crew removed the stricken bike from the gravel trap and to assess if any oil was dumped onto the track. It led the field for five laps.

During this time, BMW Motorrad team manager Daemen ran back and forth between the pit and pit wall, discussing their fueling strategy. He had told me earlier that the 24-liter tank could last between 26 to 27 laps in rainy conditions. But with the Safety Car period thrown into the mix, they needed to recalculate the bike’s fuel consumption. They also needed to figure out their pace in comparison to other competitors. Calling for a stop at the wrong time would be out of sync with field and cost them track position.

The mechanics began arranging different types of “stands” on the pit lane. They were all custom made for different purposes, including those to place the wheels. A loose wheel rolling down pit lane will be punished by a penalty.

They also prepared two types of Dunlop wet rear tyres, one intermediate and one full wet. The current rider will advise the team on which to choose.

At last, the #37 got the “BOX” message on his pit board. So do the other teams.

The bikes may appear slow on TV as they headed down pit lane, but they were fast in real life as the riders held on to the pit lane speed for as long as possible. The #37 flew into position in the blink of an eye and the four-man crew descended on it in that split second it stopped.

The wrenches went “rat-tat-tat-tat” in unison, the front and rear wheels came out, new ones went on, and and “rat-tat-tat-tat” again. But the mechanics also checked the nut with a torque wrench. (Here it was, where every second mattered, yet they still used torque wrenches, whereas most real-world mechanics never touch them.)

They yelled “GO!” to the fuel man and cleared away from the bike. With one swift motion, the biggest man in the pit (dressed in flame retardant suit) heaved the can above bike’s fuel tank and plunked it down into the dry break female coupling with an audible click, while another man stood by with the fire extinguisher. It took only a few seconds. He pulled the can off and the rider jumped on the bike, punched the starter button and away he went.

All these in less than 20 seconds.

You can watch video of the lightning fast pit stop below.

Countdown to the 8th Hour

We thought the field would settle into a rhythm. Instead, it was a crash fest.

Most riders crashed at Turn 5. Local riders know to stay away from apex as moisture seems to cling to that spot. The track was starting to dry but again, we local riders know that the Sepang International Circuit’s new surface may look dry while it’s still damp.

The most prominent crasher during this period was Mike Di Meglio on the #5 bike. While the earlier crash caused minor scrapes, this one saw extensive damage to the bike. He had to pit for repairs. His partner continued the race dead last but managed claw his way back to 21st at the 8th hour.

As the minutes ticked away, the top three began to emerge: YART Yamaha, Honda Asia-Dream Racing and BMW Motorrad World Endurance.

A second and last pitstop was called with 20 minutes to go. Again, the team did their choreographed magic. Again, they sent the rider and bike out in less than 20 seconds.

It’s all up to the rider now.

YART Yamaha was in an unassailable lead with one lap in hand, while the Honda Asia-Dream team was 1m 40s ahead in second.

Read: YART Yamaha wins inaugural 8 Hours of Sepang FIM EWC race

By now, the BMW rider Mikhalchik was lapping 3 seconds a lap faster the leading pair, but there was no way in catching the second-placed team.

The team climbed atop the pit fence to welcome their rider home. It was their second podium finish in as many races. It’s a fantastic result by all means, considering that this is the first season for the factory BMW Motorrad team.

It was also the second podium of the year for Dunlop. (Remember, there’s a tyre war in the FIM EWC, unlike in MotoGP and WorldSBK.)

The next race will be the 24 Hueres Motos at the Bugati circuit in Le Mans, France on 18th and 19th April 2020.

We wish to record our heartfelt thanks to the BMW World Endurance Team for allowing us to cover the race along with them. Them team was very professional and they were very focused on their tasks at hand. It was a true honour to experience it firsthand.

A big thank you and appreciation to BMW Motorrad Malaysia also, for setting up the coverage.

Last but not lease, congratulations to the team and BMW Motorrad as a whole.

PHOTO GALLERY

  • We were given access to the BMW Motorrad FIM Endurance World Championship Team’s pit.

  • There we saw the BMW S 1000 RR endurance racer.

  • The 8 Hours of Sepang FEWC race is happening this weekend.

BMW Motorrad announced that the new BMW S 1000 RR will be entered in the FIM Endurance World Championship last year, just prior to the start of the 2019-2020 season.

The decision seemed to have justified itself when the team finished third overall in the season opener at the 24-hour Bol D’or race in France.

We’ve published an article on some of the technical rules for the FEWC, but of course, who wouldn’t want to see the bikes up close? Well, we were given access to the team’s pits and bikes, thanks to BMW Motorrad Malaysia.

Read: 10 Points About the FIM Endurance World Championship and 8 Hours of Sepang

First of all, we were surprised how “open” all the teams were in FEWC. There was no giant separators to hide the insides of the pits, bike parts were in the open, riders walked about nonchalantly without being mobbed.

Walking into the BMW pit, there were fuel tanks on top of a transport case. These tanks feature extensions underneath and to the rear. The rear portion is placed under the rider’s seat. A 24-litre capacity is allowed in FEWC so the teams need extra space to store all that fuel.

But sitting right there in the middle was a stripped out 2019 BMW S 1000 RR. It was sitting on paddock stands without its wheels, seat cover and fuel tank.

Since refuelling need to be lightning quick, all teams use the dry break refuelling system. There are those with two couplings, the rest are with single couplings. Why two holes? Air from the tank exits through one hole while fuel flows through another. Doing this speeds up  the fueling process.

Team manager Werner Daemen greeted us and went on to explain about the bike. (Greeted by a team boss? Never happened in MotoGP.)

There are pitstops for fuel, tyres and rider change (and also crashes). As such, every attachment on the bike is made for quick release. Both wheel axles/spindles needed only three turns to be extracted. Consequently, tyre swaps take only 3 seconds!

The footrests, foot pedals, clip-ons and levers are also quick release systems. Their cable and hose attachments have quick-release couplings that can be twisted on and off.

Looking at the handlebar, there’s a button which says “START.” Yes, the bike’s starter is in place. That’s because riders will line their bikes on one side of the track, then run over from the opposite side. They then have to start their bikes and get going. This endurance tradition lives one.

Daemen pointed out the brakes. The team uses Nissin brakes instead of the usual Brembo. We’ll leave the good/bad arguments to the riders but it shows that there’s room for other manufacturers to shine in the FEWC.

We noticed the gorgeous swingarm. A closer inspection showed that it’s made by Suter, who were once involved in Moto2 racing.

Suter also makes the swingarm for the BMW S 1000 RR HP4 Race, but the swingarms on these race bikes were custom made.

We walked over to the other two bikes. One was crashed yesterday and the rider suffered some shoulder injuries.

Here, we could look right into the engine compartment. The huge airbox was still attached and the ECU sits atop it. The ECU is available to BMW customers who wish to race in endurance. However, instead of unlocking more of the engine’s power, it’s programmed to provide better fuel efficiency and engine reliability. Endurance racing is about strategy and who can be the fastest on a consistent basis, rather than an all-out horsepower battle like in MotoGP.

The rep explained that the riders love the new BMW S 1000 RR engine as it produces a lot of midrange torque. He says that this is due to the BMW ShiftCam variable valve timing/lift system.

It’s this midrange grunt that propels the bike and rider out of corners, not top-end horsepower. If you look at SIC’s layout, there are only two areas that require high horsepower i.e. the rear and front straights, while the rest are made up of short “chutes” leading into other corners. In fact, the torque helps the bike to build speed much quicker when exiting corners, translating to higher speeds down the straights. Remember our article?

Read: Torque vs. Horsepower: What’s the Difference

It has to be said here that the FEWC is a production-based series. That means the racebike must be essentially be the same as the homologation street bike. It also means that the engine architecture and capacity; frame design and material must be exactly be the same.

The FIM scrutineered the bikes and stamped the parts such as the frame.

As we mentioned before, the FEWC is where a proper tyre war takes place. This is where Dunlop, Bridgestone and Pirelli duke it out to produce the best tyres in terms of grip and durability.

The overall objective of all these rules is to encourage manufacturers to produce bikes and products that the buying public can benefit from.

The second round of the season is now in Malaysia at the Sepang International Circuit. Called the 8 Hours of Sepang, the race will play the role as the qualifier for the Suzuka 8 Hour season-finale for “part-time” teams. It means that these teams will compete alongside the regular teams of the FEWC.

So do make your way over to the Sepang International Circuit for this grand event. More details on the SIC webpage.

Electric power is without a doubt the future of mobility and BMW Motorrad has been working in closed quarters regarding their latest project, the BMW E-Power Roadster Concept. With years of R&D, this is the bike that’ll most likely go into production compared to the other electric concepts the brand has introduced in the past years. (more…)

When it comes to one of the best superbikes in the world, the BMW S 1000 RR certainly sits somewhere on the top amongst the other greats from Ducati, Honda, Yamaha, Kawasaki, and more. But what happens when you wake up in the morning and found out that your dog ‘ate’ your beloved BMW S 1000 RR? (more…)

Following Azlan Shah Kamaruzaman’s maiden championship win in the 2019 Asia Road Racing Championship (ARRC) in the ASB1000 category, the ONEXOX TKKR SAG Team is proud to announce that their results will be greatly rewarded as BMW Motorrad will be lending some factory support for the Malaysian squad in the upcoming 2020 season. (more…)

  • The BMW R18 is heading into production and will be revealed in 2020.

  • BMW Motorrad released the technical details of the engine.

  • At 1802cc, it’s the largest Boxer engine.

The BMW R18 is now heading into production and will be fully revealed in 2020.

While the running prototypes look great, it’s the engine that proves to be the biggest intrigue. That’s because at 1802cc, it’s the largest Boxer (horizontally opposed-twin) ever made, consequently how will BMW contain all that heft and make it work.

Wonder no more because BMW has released the technical specs.

First and foremost, the engine produces 91 bhp at 4,750 RPM and 158 Nm of torque at 3,000 RPM. Although oversquare in architecture with 107.1 mm x 100 mm bore and stroke, BMW claims that more than 150 Nm of that torque is already available from 2,000 to 4,000 RPM meaning that it’s made for cruising, not high-speed blasting unlike the Ducati Diavel. The cylinder bores are Nikasil coated (nickel matrix silicon carbide).

Each cylinder head houses two steels valves – one 41.2 mm intake and one 35 mm exhaust – in OHV (overhead valves) configuration. The camshafts sit higher on either side of the crankshaft and driven by a chain. The cam lobes operate the pushrods that pushe the rocker arms to open and close the valves, in turn. An OHC (overhead cam) design would make the cylinders even longer (since they’re laid down horizontally) and limiting lean angles.

 

With such huge pistons and conrods moving back and forth there’s bound to be vibration. BMW addressed this by bolstering the crankshaft with a central main bearing which cuts down on bending forces.

The powerplant is air and oil-cooled, as per the classic Boxers but also because liquid-cooling will add more heft. It already weighs 110.8 kg including the transmission and intake system. An oil-cooler is standard fitment.

 

BMW reverted to a single-disc dry clutch for the R18. It’s feature on all BMW Boxers prior to the wasser-head (liquid-cooled or “LC”) Boxer in 2012. However, the R18’s clutch is “self-reinforcing” (self-servo which compresses the clutch plate to the friction plate when running, resulting in softer clutch pull) and anti-hop (slipper clutch) functions.

But guess what? BMW offers a reverse gear option.

Apart from that, the manufacturer also revealed that the shaft final drive will be kept exposed just like the classic R-series bikes of yore.

There are many other details, of course but those above are the most common ones that most riders would like to know.

So apart from being a modern engine with classic touches, the design itself is pretty interesting. It looks really art-deco especially with that large cover up front and aerofoils on the cylinder head covers.

Photo credit MCN
  • The BMW C 400 X and BMW C 400 GT are part of BMW Motorrad’s Urban Mobility lineup.

  • They are well equipped with the TFT screen, Bluetooth connectivity, Keyless Ride, ASC and ABS.

  • Sure, they are scooters but they ride like big bikes hiding underneath the bodywork.

Scooters. Lovely bikes to ride as commuters, low fuel consumption, lots of cargo space. But iffy handling, lowly specs and “meh” performance. Right? But what about the BMW C 400 X and BMW C 400 GT?

Now, this dynamic duo are really different in almost every single way. Hear us out.

BMW C 400 Platform

BMW Motorrad calls their scooters “Urban Mobility.” The C 400 lineup are the smallest of the C-series which includes the larger (and faster) C 650 range.

Both are powered by the 350cc, single-cylinder engine which produces 34 bhp at 7,500 RPM and 35 Nm of torque at 6,000 RPM. Power is sent through a  centrifugal clutch and finally a stepless CVT transmission.

The forks are 35 mm units with double spring struts at the rear. But there are two 265 mm brake discs up front and one at the back. Wheelbase is a slightly long 1565 mm. ABS and ASC (Automatic Stability Control i.e. traction control) are standard on both bikes.

That large TFT screen takes centre stage when you approach either bike. Look closer and you’d pick out the keyless ignition button, keyless fuel cap and BMW multi-controller wheel.

The TFT can connect to your phone and Bluetooth communicator.

This is where it gets interesting.  You can have navigation on the TFT screen when connected to the BMW Connect app on your phone, showing you turn-by-turn directions.

Switching to the multimedia screen, you can see the music that’s playing through it. From there, you could use the multifunction wheel on the handlebar to play, pause, choose the song, and even playlist. Only problem was we couldn’t get the karaoke function to work. Just kidding.

Now flip it to the phone function and you’d see your phone’s contacts. Select the person you want to call and voila.

Sure, these functions are available on bigger bikes, too but no other scooter outside of BMW’s line-up do.

BMW C 400 X (from RM 44,500)

The C 400 X is designed for daily commuting. That explains its distinctive “cut down” look for easy manoeuvring through city traffic and narrow streets. 

Compared to the C 400 GT, the “X” has a flyscreen, thinner seats and minimal bodywork. The headlamp looks similar to the R 1250 GS’s while the  tail section looked like it was tacked on although it shares the G 310 R’s design.

It weighs 204 kg fully fuelled and ready to go. But it could still carry 201 kg of payload! That means if you and your passenger weigh a total of 150 kg, you could still load 51 kg of luggage onto the bike. What is this? A GS?

But it’s a scooter, right? Yes, until you ride it.

Twisting the throttle the first time, I gave it a wristful like I would on other scooters and small bikes. The bike just took off down the road so fast I thought I was going to blow past the intersection and into the Oldtown White Coffee’s lobby up ahead. Whoa boy!

A two fingered pull on the front and rear brakes brought the bike to a complete stop as quickly as a big bike on Brembo brakes. I kid you not.

Approaching the sweeper after the fire station at Cyberjaya, I slowed well down as I feared that the handlebar may wag back and forth, besides grounding the bodywork like on other scooters. Surprise, surprise. The handlebar stayed steady as if it has a steering damper (it doesn’t) and there was a huge amount of ground clearance left.

So, I gunned it into the next left-hander which led to highway at much higher speeds. The bike’s low CG-long wheelbase combination actually let the bike hold its line and truly railed through. Again, the handlebar stayed steady. It was as if I was riding a conventional big bike.

We had the opportunity to ride both bikes to a camping trip organised by GIVI Asia (Malaysia) the next day. Running on the highway to GIVI Asia;s HQ at Bukit Beruntung, the C 400 X ran at 130 km/h without feeling like it was going to throw out the piston and rod through the footboard, despite its quoted top speed of 139 km/h.

Y-suku (Yamaha Y15ZR) riders tried to give chase but they soon gave up.

The engine was very economical too, still leaving 2/3 of the 12.8-litre fuel after that 63.3 km blasting.

It was a 137 km ride from GIVI Asia’s HQ at Bukit Beruntung to Lata Lembik in Pahang. Part of the route covered Batang Kali from Ulu Yam Lama to Gohtong Jaya, before descending back down to Genting Sempah. From there it was on the Karak Highway, then through Bentong.

My colleague Amirul was ahead on the C 400 GT, riding with pillion.

Heading up Batang Kali, both of us were constantly snapping at the back wheels of the bigger bikes up ahead. The road was wet but both of us C 400 riders just kept up the pace.

And we still had 2 out of 10 bars of fuel left  when we reached our destination.

BMW C 400 GT (from RM 48,500)

We switched bikes later in the week.

It takes on the maxi scooter style for touring, hence the “GT” designation. You get a larger bodywork, and larger and taller windshield for more protection from the elements. The headlamp and taillamp were just as distinctive as the X’s although styled differently.

The seats were felt a little wider and taller due to extra padding. The front panel was style differently and had two lockable cubby holes just like the X’s. There’s a USB connector inside the left compartment for charging devices.

The extra bodywork brings it wet weight to 212 kg, but maximum permissible payload increases to 203 kg.

That’s a far as the difference goes between the two bikes, the rest are based on a shared platform.

The GT has a taller seat height due to the taller seat but I liked the extra comfort it afforded. Riding it out the first time, the lack of windblast was immediately discernible. 

But the bike still hoots down the road like the X. The extra comfort was especially appreciated when riding the 60 km daily commute as I didn’t get buffeted by the wind. The windshield was great at stopping rain and water splashed off other vehicles in front.

 

The GT’s handling was slightly different to X’s due to the higher seat.  Although it still tracks through corners, the handlebar did wag around. But as long as the bike headed to where I pointed it, I wasn’t concerned.

Conclusion

The only shortcoming was storage space under the seat. In order to keep the seat low and body narrow, the underseat compartment was shallow. Yes, you could place two jet-type helmets in there, but you couldn’t lay down a laptop backpack. Ah well, a top case will cure this.

Another thing was you have turn on the ignition in order to open the forward storage compartments and seat. We know it was designed as so in the interest of safety, though.

They ain’t exactly cheap but if you are the type who loves scooters, they are truly worth your hard-earned money.

We loved the C 400 X and C 400 GT. Both actually surprised us at how good they were as scooters… er… Urban Mobility vehicles. Maybe that’s why BMW Motorrad doesn’t call them scoots.

Khabar angin mengenai penghasilan model dengan enjin bersesaran 900cc telah pun bertiup kencang sebelum ini namun tiada siapa menyangka BMW akan memperkenalkan dua jentera dengan enjin tersebut di EICMA 2019.

Bagi yang mengikuti perkembangan BMW di EICMA, pengeluar motosikal Jerman itu telah pun melancarkan S 1000 XR yang telah dikemaskini bagi pasaran 2020.

Bagaimanapun, BMW Motorrad turut memperkenalkan versi 900cc.

Kedua-dua model ini merupakan langkah BMW untuk memeriahkan segmen pertengahan.

Meskipun didatangkan dengan cermin depan boleh laras dan ‘fairing’ namun F 900 XR bukanlah bercirikan motosikal adventure seperti F 850 GS, sebaliknya menawarkan ciri sebagai motosikal sport touring.

Sementara itu, F 900 R merupakan evolusi daripada F 800 R yang menawarkan rekaan motosikal jenis naked.

Kedua-duanya mengguna pakai enjin inline-twin 893cc yang menghasilkan 105hp dan didatangkan dengan beberapa teknologi terkini antaranya:

  • Mod tunggangan Pro
  • Penyerap hentakan elektronik boleh laras
  • ABS Pro
  • Adaptive cornering light
  • The 2020 BMW F 900 XR and 2020 BMW F 900 R were launched at EICMA 2019.

  • The engine was enlarged for more power.

  • Both models are comprehensively equipped.

BMW Motorrad dropped a surprise by launching the 2020 BMW F 900 XR and 2020 BMW F 900 R Launched at EICMA 2019, because everyone had expected the 850 versions.

The engine started out as the 853cc parallel-Twin lump from the F 850 GS but was given a 2mm increase in bore size, resulting in 893cc. The displacement bump results in 105 bhp and 92 Nm of torque, compared to 95 bhp and 92 Nm. The 270-degree crank is retained.

The power increase puts the bike in contention in the middleweight sport-touring segment.

A new frame ties the new engine as a stressed member and everything else together. A new 15-litre plastic fuel tank is used to keep weight down.

The F 900 XR’s design closely resembles the 9Cento concept revealed a year ago. The concept’s lines were also adopted to the new S 1000 XR.

As for the F 900 R roadster/standard/naked bike, its styling resembles the R 1250 R, albeit with more aggressive lines. It’s fuel tank is also moved to the front from underneath the seat, following the change first seen on the F 850 GS.

These two may be middleweights, but they follow BMW Motorrad’s move in equipping almost all models with high-end features (even the C 400-series scooters have TFT screens and keyless ignition). Hence these models have Road and Rain ride modes, ABS, keyless ignition and TFT screen.

You can spec’ them up further by adding two Pro ride modes, electronic suspension, ABS Pro, cornering lights and quickshifter (yes!).

Seperti yang dijangkakan, BMW Motorrad memperkenalkan S1000 XR yang telah dikemaskini bagi tahun 2020.

Jentera baharu ini kini 10 kilogram lebih ringan berbanding sebelumnya dan enjin diguna pakai diambil terus daripada S1000 RR 2019 dan mampu menghasilkan 165hp pada 11,000rpm dan 114Nm pada 9,250rpm.

S1000 XR 2020 ini turut didatangkan dengan sistem BMW Motorrad Dynamic ESA terbaru dan Dynamic ESA Pro yang menawarkan dua mod ‘damping’ tambahan.

Pada masa sama, S1000 XR ini juga dilengkapi dengan mod tunggangan ‘Dynamic Pro’ yang membenarkan penunggang membuat tetapan mengikut kesesuaian sendiri.

Mengikut jejak model BMW Motorrad lain, S1000 XR ini turut dipasang dengan paparan TFT 6.5 inci terbaru.

Ruju spesifikasi di bawah:

Setelah sekian lama menanti, akhirnya BMW Motorrad Malaysia melancarkan BMW S1000 RR di Litar Antarabangsa Sepang (SIC), hari ini.

Selain daripada S1000 RR menjadi tumpuan utama, BMW Motorrad Malaysia turut melancarkan R1250 R dan R1250 RS.

Menurut Ketua BMW Motorrad Malaysia, Owen Riley, BMW S1000 RR merupakan ikon tepat dalam membawa imej motosikal BMW Motorrad.

“Kelajuan, ketangkasan dan prestasi membentuk asas setiap motosikal BMW Motorrad.

“Dalam segmen Roadster, barisan motosikal kami dirumus dengan daya tahan yang tinggi; sama seperti motosikal Superbike kami dalam segmen Sport yang memfokuskan kelajuan serta kelincahan, sepertimana ia telah menjurus kepada kemenangan pelumba-pelumba BMW sejak lebih dari sedasawarsa yang lalu, termasuk kemenangan yang dilakar di Alpe Adria International Motorcycle Championship pada September tahun ini.

“Tiga model baharu yang kami persembahkan pada hari ini pastinya akan terus memberi nafas kepada legasi ini sementara ia merekodkan pencapaiannya yang tersendiri,” jelasnya.

BMW S1000 RR didatangkan dengan enjin 999cc empat in-line terkini yang menghasilkan 207hp pada 13,500rpm dan 113Nm pada 11,000rpm.

Bagi memastikan jentera ini kekal ringan, model ini turut dilengkapi dengan bateri ‘M’ yang ringan dan bebas penyelenggaraan.

Seperti jentera BMW lain, S1000 RR turut disuntik teknologi ShiftCam yang memastikan kelancaran penyaluran kuasa ketika berada dalam gear rendah atau tinggi.

BMW S1000 RR 2019 ini juga lebih ringan dengan 193.5 kilogram berbanding model terdahulu – 208kg.

Ciri menarik lain ditawarkan:

  • Dynamic Damping Control (DDC)
  • Empat mod tunggangan
  • Paparan TFT 6.5′
  • ABS Pro
  • DTC Wheelie
  • Launch Control

Menurut BMW, jentera baharu ini boleh didapati disemua pengedar rasmi BMW dalam masa terdekat dengan harga ditawarkan pada RM138,500!

  • The 2019 BMW S 1000 RR, 2019 BMW R 1250 RS, 2019 BMW R 1250 R were launched today at the 2019 Shell Malaysia Motorcycle Grand Prix.

  • Only the S 1000 RR with M Sport Package is available at the moment.

  • The R 1250 R and R 1250 RS adds to BMW’s Boxer family.

The 2019 BMW S 1000 RR, 2019 BMW R 1250 RS, 2019 BMW R 1250 R were launched today at the 2019 Shell Malaysia Motorcycle Grand Prix.

2019 BMW S 1000 RR (from RM 138,500.00 for M Sport Package)

The 3rd-generation S 1000 RR has been long-awaited even before its official launch at EICMA 2018. Suffice to say that it was one of BMW Motorrad’s worst kept secrets!

It’s easy to see why BMW’s superbike is so popular these days. It’s one bike that would go fast as you dare and as slow as you want it to without complaining. It’s also a superbike that you could ride to track, whack off the mirrors and indicators, tape up the headlamps and taillamp, blast around the track, and ride it to work the next day.

The bike launched today is the M Sport Package variant.

Highlights:
  • 999cc, liquid-cooled, 16-valve, DOHC, inline-Four with ShiftCam.
  • The new lump produces 207 bhp (152kW) at 13,500 RPM and 113 Nm of torque.
  • The ShiftCam technology varies both valve opening timing but also lift.

  • Hollow-stem lightweight titanium intake valves.
  • This allows the bike linear and good spread of power.
  • But also good fuel consumption at 6.4 litres per 100 km.
  • Oil pump and water pump integrated as one — saves weight and width.
The coolant/oil pump
  • Suspension is handled electronically by next generation of DDC (Dynamic Damping Control).
  • The rear shock is moved further back, away from exhaust and engine heat.

  • A new frame called Flex Frame — with specifically tuned zones of stiffness — provides better grip in corners and feedback.
  • Leaner fuel tank, narrower midsection for better knee grip and support.

  • The bodywork has short overhangs — the entire bike sits between the wheels.

  • More compact dimensions are the goal including engine, frame, tank, bodywork.
  • Revised exhaust system, engine, and M-lightweight battery.

  • The M Sport package includes M sport seat, country-specific taillamp, M carbon fibre wheels and lightweight M battery.
  • The revisions cut weight down to just 193.5 kg from the standard bike’s 208 kg.

  • Standard electronic rider aid include Rain, Road, Dynamic and Race.
  • Options are the “Pro Modes” — Pro 1, Pro 2, Pro 3 which includes DTC, ABS Pro, DTC Wheelie Detection, engine torque and engine braking adjustments.

  • Also available are race assistance modes such as Launch Control and Pit Lane Limiter.
  • Signature S 1000 RR smooth gearshifts are handled by the HP Shift Assistant Pro (standard).
  • New 6.5-inch TFT screen with Bluetooth connectivity.

BMW Motorrad Malaysia brought in the M Sport package as the introduction as the S 1000 RR is of limited stock worldwide. As such, BMW Motorrad Malaysia will send a bike to each dealer for customers to view and place orders.

The base S 1000 RR will arrive in Malaysia in 2020.

2019 BMW R 1250 RS (from RM 106,500.00) and 2019 BMW R 1250 R (from RM 102,500.00)

2019 BMW R 1250 RS

The R 1250 RS and R 1250 R completes the BMW Boxer family. The RS is the sport-tourer (the R 1250 RT is the luxury sport-tourer), while the R is the Roadster (naked street bike). We feel that the R 1250 RS’s smaller size will make it easier to ride as a daily commuter, as well.

2019 BMW R 1250 R
Highlights:
  • Features the new 1254cc Boxer with BMW ShiftCam technology.
  • Produces 136 bhp and 143 Nm of torque.

  • The engine is also economical, consuming only 4.75 litres of fuel per 100 km.
  • Two standard riding modes that adapt to riding style.

  • Automatic Stability Control is standard, as is Hill Start Control.
  • They also feature Riding Modes Pro which includes Dynamic and Dynamic Pro.

  • The Dynamic Traction Control ties in with the Riding Modes Pro selection.
  • New 6.5-inch TFT screen with Bluetooth connectivity.

BMW Financing

BMW Group Financial Services Malaysia provides financing for these new bikes. You can ride the S 1000 R from RM 1,690 per month, R 1250 R from 1,250 per month, and the R 1250 RS RM 1,300 per month. These amounts are based on estimates 80 percent loan for 4-year tenure.

Archive

Follow us on Facebook

Follow us on YouTube