Bikesrepublic

Latest News

  • New Dash 125 set to replace the aging Wave Dash 110. 
  • Features a new, more powerful engine and updated design. 
  • New Dash 125 will also star in a local one-make race series in Cub Prix. 

Boon Siew Honda has introduced the replacement model to the popular Honda Wave Dash 110. Now known as the Honda Dash 125, the successor to the Wave Dash 110 features everything you would expect of a new motorcycle – improved performance and a stylish new design.

The biggest update to the Dash 125 is its engine which is now 125cc and outputs 9.8hp at 8000rpm and 9.54Nm of torque at 6500rpm. The fuel injected engine is fed by a four-litre petrol tank, and offers both an electronic starter and a traditional kick starter. Power is fed to the rear wheel via a four-speed gearbox featuring a wet clutch.

Weighing in at just 103kg fully fuelled and ready to ride, the new Dash 125 offers an underbone chassis frame, a telescopic front suspension, twin shocks at the rear, and discs brakes up front and at the rear.

As for the exterior, the Dash 125 features many value-added upgrades over its previous model, the new model is now equipped with LED headlights, new leg shields, sports rims, a new mirror design as well as a new speedometer.

The new Dash 125 will be available in four new colours, which are Pearl Magellanic black, vivacity red, pearl nightfall blue and the popular Repsol edition.

Speaking at the launch event held at the Ikano Power Centre in Kota Damansara, Managing Director and Chief Executive Officer of Boon Siew Honda, Mr Keiichi Yasuda said, “Over the years, the higher CC cub market has grown increasingly competitive and challenging due to greater customer demand. As a company that is committed to bringing new values for the joy of customers, Boon Siew Honda has been refining our model offerings to meet the expectation of Malaysian riders for superior riding experience. Having understood the current trend and demand in Malaysia, we are extremely excited to introduce the new Dash 125 that is set to push the benchmark higher in the cub segment.”

The new Dash 125 will also be the new racing machine of the Honda One-Make Race in the Malaysian Cub Prix. Previously known as the “Honda Wave Alpha Challenge” for the Wave Alpha, the name of the race will now be “Honda Dash 125 Challenge”, which is in line with the migration to the 125cc model.

Adding to that, Boon Siew Honda also announced the appointment of popular Malaysian racer and two-time Asia Road Racing Championship winner Zaqhwan Zaidi and as the ambassador for the new Dash 125.

The Honda Dash 125 is now available in Malaysia with prices starting from RM5,999 for the single disc brake model, RM6,299 for the double-disc brake model, and RM6,499 for the Repsol Edition. All bikes come with a two-year or 20,000km manufacturing warranty.

  • The KTM Malaysia Orange Enduro 2018 series moves to KTM Malaysia’s Enduro Track at Sungai Buaya.

  • It attracted 101 entries, divided into 7 categories.

  • This round also added the Dual-Purpose and Women’s Categories.

Round 2 of the KTM Malaysia Orange Enduro 2018 saw even greater participation than Round 1 held in Sungai Petani, Kedah in April.

KTM Malaysia Orange Enduro 2018 Round 1

101 participants accepted the challenge to put their skills on the line in going up against fellow competitors in this all-make event.

Participants and their teams had started setting up their pit area and motorcycles from as early as 7am, accompanied by a constant stream of registrations right up to the start of proceedings. Race series sponsors such as Gracshaw and Shizens (facial care products, whom Gabit is the Brand Ambassador) had also set up their wares for display and branding.

KTM Malaysia’s Sungai Buaya track layout had been altered to provide an even greater challenge to the riders eliminate advantage through familiarity. KTM Malaysia’s factory rider Gabit Saleh and trials rider Acoi Pangkolo has worked throughout the week and night before the event to ready the track. The former laid out the enduro zones such as hill climbs, jungle tracks, whoops and jumps while the latter prepared the obstacle zone complete with large tyres and log crossings. The lap distance had been expanded to approximately 6-km long.

A safety briefing was carried out before the start of the race and competitors had their bikes fitted with transponders to accurately log their times.

The weather was hot and dusty throughout the day.

ED5 – CubCross Open

Proceedings got under way with the “smallest” class. As the name implies, these motorcycles started out as underbones, better known as kapchais, and were modified to carry longer travel suspension and among other things for off-road duties.

Being “Open” means a competitor could bring any Cubcross bike regardless of engine capacity or type.

Ahmad Kamarul Munir (#50) took the holeshot at the start and left everyone in the dust with a comfortable lead at the fall of the chequered flag. Hafizi Bin Usman (#78) crossed the line in second, while Ahmad Jafri Bin Razali (#22) completed the podium.

A total of 13 riders took part in this category.

ED4 – CKD Open

This class is meant for locally-assembled dirtbikes. As such, it was inundated with Kawasaki KLX150 and KLX250s. 23 participants took to the starting grid and they were given 30 minutes to complete as many laps as possible.

There was a fight for the lead began from the start. Besides that, the action soon got very entertaining for the crowd as the riders started making mistakes after mistakes. The logs proved especially troublesome for the 150s due to their low ground clearance.

Muhamad Amirul Bin Ramli (#42) pipped Muhammad Faiz Zulhilmi Bin Fasli (#94) by just 0.7 seconds at the finish line.

while Ahmad Kamarul Munir crossed the line less than 0.5 second behind the no. 2 placed man.

ED3 – Veteran Open

Action continue afterwards with the Veteran Open category, which is open to riders above 40 years old. The class saw a total of 18 riders. They were allocated 30 minutes plus 1 lap.

Asdin Udin led from start to finish, taking the checkered flag almost 2 minutes ahead of Richard Lim and 3 minutes from Mohd. Sanusi Bin Mohd. Yaman.

ED6 – D-P Rally

The D-P Rally (dual-purpose rally) is a new addition to the KTM Malaysia Orange Enduro 2018 series and is open to adventure motorcycles 650cc and above, attracting 11 entries.

Most of the participants had just completed the GIVI Rimba Raid Mat Daling jungle rally last weekend.

Ahmad Daniel Haiqal made a lightning start and rode with his trademark aggression ahead of Wong Chun Hing (better known as Bee Wong).

But Bee ran into a hole too hard and overstretched his chain, causing to slip repeatedly off the rear sprocket. He had no choice but to stop his KTM 1190 Adventure for repairs while other competitors passed him.

Ahmad Daniel Haiqal kept pushing hard on his Ducati Multistrada 1200 Enduro but a mistake relinquished his lead to Shamsul Azhar Abu Hazim (Acoi Pangkolo). The latter started riding harder after that point to open up a healthy gap all the way to the finish.

Bee then pushed hard to repass the field, save for Shamsul and Haiqal to finish third.

ED2 – KTM Open

This category is open to KTM dirtbikes only.

Ahmad Daniel Haiqal also participated and went on to win some 45 seconds ahead of Lai Wai Seng and 3 minutes ahead of Muhd Hazim to capture the second podium of the day.

With 24 entries, this class is an indication of the number of KTM dirtbikes in circulation.

However, the hot and dusty conditions took its toll on many riders; there were 8 non-finishers.

ED7 – Women Enduro

As with the D-P class, the Women Enduro category is a new addition to the KTM Malaysia Orange Enduro 2018. The category is directly sponsored by Malaysian comedian and celebrity, Achey Bochey, who is an enduro rider himself.

There were just two registrations in the morning but the number of participants increased to 9 by the start of the race.

These ladies could not only ride but race too. The trio of Nur Haziyah Bt. Ramli, Nor Hasinah Mohamed and Siti Noor Safira Binti Mustafa were locked in a battle from early on, but it fizzled into a straight fight between Nur Haziyah and Nor Hasinah.

Nor Hasinah had led most of the race until she made a mistake which put here down and was passed by Nur Haziyah who romped home to take the win.

ED1 – Open Category

This is the premier category of the series, which attracts the top off-road riders in the country, including the aforementioned Ahmad Daniel Haikal, Muhammad Khairul Afif and Muhd. Habibullah Muhd. Saleh @ Gabit, among a total of 15 riders.

The action was fierce between the three in the early part of the race, before Haiqal pulled out a large lead from the rest of the field. But again, a mistake cost him dearly; to which Afif and Gabit capitalized on. However, both riders took it easy by the latter stages of the race, allowing Afif to win from Gabit by 10 seconds. Haiqal recovered to finish third, a distant 2 minutes behind.

Conclusion

The KTM Malaysia Orange Enduro has shown that off-road competition is healthy in Malaysia as the number of competitors are increasing by each round. KTM Malaysia’s decision to organize the Orange Enduro is also a positive gesture in allowing enthusiasts and pros to the opportunity to race and gauge their standards, regardless of the brand of motorcycle they are riding.

In fact, other manufacturers do not even organize their own off-road events on such a scale, despite the level of enthusiasm displayed at the Orange Enduro, including the dual-purpose and women’s categories. Look at how many participants signed up for the GIVI Rimba Raid Mat Daling the week prior.

There was also a huge turnout of spectators, which easily outnumbered the participants by 2:1.

It’s time for other manufacturers to step up to the plate.

PICTURE GALLERY

  • The Moto Guzzi V7 III Carbon has just been launched in Malaysia.
  • The Carbon variant features carbon-fibre components, red highlights and a unique alcantara leather seat.
  • Only 1921 units will be produced worldwide and you can book yours now.

Moto Guzzi Malaysia today introduced the limited edition Moto Guzzi V7 III Carbon. An aesthetically racier, more performance oriented variant of the popular V7 III.

The Carbon variant, which was introduced at the Moto Guzzi showroom at The Gasket Alley in Petaling Jaya, is distinguished by its carbon fibre components such as the shortened fenders and side fairings, as well as the Matt black colour with red contrasting highlights on the engine cover, logo and front brake caliper.

The seat (above) is also unique to the Carbon model and is made of water repellent Alcantara, leather. It too features red highlight stitching as shown below. In fact, the carbon features many such unique features, such as the tank cap made of anodized black billet aluminum, headlight frame, injector covers and the rear brake master cylinder.

The Moto Guzzi V7 III Carbon is made in limited number, 1921 to be exact, a number that recalls the year Moto Guzzi was established.

The series number of the model is identified by the plate on the handlebar riders as shown above. Also shown above is the dedicated single circular display, which is typical of variants such as the V7 III Stone, Rough and the Carbon. The V7 III Special, Racer and Milano variants on the other hand, have a second circular display for the rev counter.

At the heart of this Carbon model is a transversal V-twin engine, which is now in its third iteration since the original engine was first introduced back in 1967. The 744cc engine features twin valves with light allow pushrods and rockers as well as aluminium heads, pistons and cylinders that help to generate 52hp at 6200rpm and 60Nm of torque at 4900rpm.

Power is transferred via a six-speed transmission which was first introduced in the V7 II model, but with an updated, longer first and final gear ratio that are able to fully exploit the torque and power of the engine.

On the safety front, the V7 III Carbon comes equipped with a four-pot Brembo caliper up front gripping a 320mm disc brake, ABS braking as well as an adjustable traction control system called the Moto Guzzi Traction Control system, which can be adjusted to two sensitivity levels or turned off entirely. The rear brake consists of a 260mm disc with a twin-pot caliper and a master cylinder with built-in resorvoir.

As for the handling of the bike, the sitting position is commanding which is typical of modern-retro machines. The steel frame and the completely reworked front end of the third generation variant of the V7 is said to give the bike a steady feel at high speed and in corners.

As for the the shocks, the front features basic non-adjustable forks with 5.1-inch of travel which the rear is kept in check by a set up Kayaba shocks with 3.8-inch of travel at the rear, adjustable for pre-load and travel.

The limited-edition Moto Guzzi V7 III Carbon is priced at RM74,900 and is now available for viewing at the Moto Guzzi showroom at The Gasket Alley in Petaling Jaya.

  • As motorcycles become ever more complex, technicians of higher knowledge are in demand.

  • More and more owners send their bikes to official workshops due to that complexity.

  • TOC Automotive College offers the Superbike Technician Course geared towards that goal.

Believe it or not, one of the greatest challenges of superbike ownership in Malaysia – and probably globally for that matter – after acquiring the bike of your dreams, is where to get it properly maintained. The bike industry is no different from the car industry when it comes to repairs and maintenance, with many owners either taking their pride and joy back to the official importer, or to someone they are familiar with at a workshop they’ve been going to for years and years.

Add to the fact that the motorcycle scene in Malaysia has been growing steadily over the last few yearswith so many new superbikes from various bike-makers have being introduced in rapid succession, there has never been a time when certified and qualified superbike mechanics were more in demand than right now.

Please click on the link below to know why it’s important to have certified technicians working on your bike.

Why it is Important to Have a Certified Technician Working on Your Bike

And on a more personal note, we all have that one favourite superbike technician that we consider “a friend” and whole-heartedly recommend our fellow bikers to take their bikes to when they have a problem don’t we? So who’s to say that technician couldn’t be you! It’s a growing market that doesn’t show any signs of slowing down, and here’s your chance to be part of it…

TOC has developed a special “Superbike Technician Course” (SBC) to assist in what can only be described as a rapidly growing industry, as aforementioned.

The TOC SBC is made up of three levels of academic and career development, and all one needs is a minimum Form 3 education to apply for this 18-month course, which includes practical work-experience with TOC’s industry partners. The levels include:

Level 1:

  • Motorcycle workshop safety
  • Application of related study
  • Basic metal work and introduction to motorcycle technology
  • Power generation system (engine)
  • Repair and maintenance of motorcycle fuel & ignition systems
  • Supervised Industrial Training (SIT 1)

Level 2:

  • Repair & Maintain motorcycle engine systems
  • Power transmission system
  • Chassis – steering & suspension systems
  • Chassis – braking systems
  • Motorcycle service and maintenance
  • Supervised Industrial Training (SIT 2)

Level 3:

  • Motorcycle electrical systems
  • Drivability & Performance testing
  • Transmission system overhauling
  • Engine overhauling
  • Elective Programmes on specific motorcycle brand
  • Supervised Industrial Training (SIT 3)

Furthermore, upon completion of the 3-level course, career opportunities will abound in the fields of the motorcycle manufacturing industry, motorcycle assembly plants, motorcycle spare parts stores, motorcycle dealerships, motorcycle service & repair shops, Superbike Technician, or you can start your own motorcycle service and repair workshop.

Interested? Refer to the flowchart below to see the process from the start of your journey to become a Certified Superbike Technician with TOC!

The TOC SBC process:

TOC SBC Costs per Level:

TOC also provides ‘100% education loan’ for attending the SBC, which you can find details of at https://www.toc.edu.my/toc-bina-bakat-program/ , or email info@toc.edu.my for more details. TOC Automotive College is located at:

So what are you waiting for? If it has always been your dream to work in the motorcycle service line, or to start your very own motorcycle workshop, then this is the perfect platform to get you started on the path to achieving your dreams. Don’t wait, find out more about the TOC Superbike Technician Course at www.toc.edu.my or call (+603) 7960 8833 for more details.

To know more about TOC’s Superbike Technician Course, CLICK HERE! (Link to the link below)

https://docs.google.com/forms/d/e/1FAIpQLSep9P7Mn_xXo8uV10nhoJ7uu0FyUXdQ6oNLkDFMzXHiSU03pw/viewform

  • Dani Pedrosa has officially announced his retirement from racing at yesterday’s MotoGP pre-race conference.

  • The Repsol Honda rider stated that although he had many great offers to continue racing, he needed to focus on other priorities in his life.

  • Dani Pedrosa is easily one of the most successful riders after a prosperous 18-year career.

After months of speculations, Repsol Honda’s Dani Pedrosa finally made his official announcement regarding his future in MotoGP. At the end of the 2018 season, Dani Pedrosa will retire from motorcycle racing and yes, we are very sad to hear about it. (more…)

  • Boon Siew Honda has launched the 2018 Honda PCX commuter scooter.

  • The new model incorporates a host of new features.

  • The 2018 Honda PCX is priced at RM 10,999 with 0% GST, without road tax, insurance and registration.

As promised, Boon Siew Honda has launched the 2018 Honda PCX urban commuter scooter.

The new PCX combines the luxurious feel, performance, convenience, ease of use and fuel economy of the previous model with a host of new features.

First up, the 2018 Honda PCX’s genuine good looks have been refreshed with new body panels for what Honda calls a premium, sharper and sportier look. Complementing the new appearance is a compact dual-LED headlight with integrated Daytime Running Lights (DRL). An LED taillight completes the new design.

The changes are not only skin-deep as the bike also receives an all-new and lighter steel duplex cradle frame, which results in a shorter wheelbase for improved manoeuvrability and road feedback. The suspension has also been improved and the addition of new 14-inch alloy wheels, 27o rake and 19mm trail should result in an easily controllable ride.

Hydraulically damped, telescopic forks support the front, while dual coil-over shocks suspend the rear and swing-mount drive unit.

The seat is a low 764 mm and the narrow waist gives easy ground access for manoeuvring at parking speeds.

No scooter will be complete without ample storage space. As such, there is a 25-litre underseat storage compartment. Not only that, the seat is propped up by a spring-loaded hinge to ease access. The compartment can accommodate a full-face helmet. There is also a glove box at the front which includes a 12-volt adaptor for charging electronic devices.

In keeping with the times, Honda has also given the new PCX a fully digital instrument panel. It displays every data a rider requires such as speedometer, digital clock, odometer, Idling Stop System indicator, oil change (service) reminder, fuel gauge and fuel consumption indicator.

Speaking of fuel consumption, it was the Honda PCX which set the bar on fuel economy. Firstly, the PGM-FI electronic fuel injection system delivers accurately metered amounts of fuel for optimised performance and economy. Secondly is the Idling Stop system which made its debut on our streets in the first PCX. The fuel injection stops the engine and fuel delivery after idling for three seconds while all electrical systems are still functioning. The engine is restarted when the rider twists the throttle. Honda claims the new PCX’s fuel economy could reach 51.2 km/l with the Idling Stop system activated. You can expect a good range with the 8-litre fuel tank.

The 2018 Honda PCX is powered by a 149cc, single-cylinder, SOHC, liquid-cooled, four-stroke engine with a bore and stroke of 57.3 mm and 57.91 mm, respectively. The engine pushes out a healthy 14.5 bhp (10.8 kW) at 8500 RPM and 13.6 Nm of torque at 6500 RPM.

The power is sent through a Honda V-Matic Dry-Type Automatic Centrifugal Clutch transmission on its way to the rear wheel. The transmission has been revised to further the range of gear ratios, hence delivering smooth acceleration and stronger acceleration from mid- to high-speed ranges, which makes it ideal for overtaking.

Also making its debut is the SMART Key System which incorporates keyless starting, anti-theft and answer-back features.

The 2018 Honda PCX is offered in the popular Pearl Metalloid White, and new Euphoria Red Metallic and Radiate Grey Metallic.

Boon Siew Honda priced at RM 10,999, with 0% GST, exclusive of road tax, insurance and registration.

Archive

Follow us on Facebook

Follow us on YouTube