Bikesrepublic

Latest News

  • Indonesia will host the first MotoGP street races from 2021.

  • The new 4.32-km track will be in Mandalika, Lombok.

  • The new round will bring the MotoGP schedule to 21 races per year.

After years of debates and no-go’s, the Indonesia MotoGP is on for the first street races from 2021.

The event will be in the Mandalika district on the island of Lombok from 2021 to 2023. The state-owned Indonesia Tourism Development Corporation (IDTC) and MotoGP promoter Dorna signed the agreement on 21stFebruary in Madrid, Spain.

The IDTC President, Abdulbar M. Mansoer, told Motosport.com that the FIM Safety Officer Franco Uncini approved the circuit’s design.

However, the new 4.32-km length and 18 corner track will be built from scratch unlike Monaco and Singapore. The track will become public roads after the MotoGP event.

Lombok circuit layout – Credit Motorsport.com

French Vinci Construction from France will begin work in September this year.

The entry of MotoGP into Indonesia is what Indonesia and Dorna had dreamed of for a long time, as the country represents the largest motorcycle market in the world. Indeed, this is the reason why the Repsol Honda chooses to launch their team there every year (apart from this year’s due to the Repsol-Honda 25th partnership anniversary).

Indonesia’s entry will bring the series to 21 races per season, after Finland’s entry in 2020.

It will be interesting to see how the new schedule pans out, for both the regular season and out-of-season tests.

Source: Motorsports.com

  • The 2019 Honda CB250R is aimed at both beginners and experienced riders.

  • It is part of Honda’s Neo Sports Café line-up.

  • It brings back the fun of something simple, easy to understand and accessible.

We always crave for more power, of course. Power, power, power, but it never seems to be enough, does it? However, the 2019 Honda CB250R may just change your mind.

Honda aims the CB250R at both entry-level and more experienced riders alike, featuring all the basic needs of virtually any rider.

Introduction to the 2019 Honda CB250R

The CB250R is styled like its bigger brother, the CB1000R, as part of the Neo Sport Café lineup. The three words Neo, Sport, and Café points to the mix of classic and modern styling cues. In a nutshell, the line-up’s designs aren’t modern retros like the CB11000F, yet not wholly contemporary like say, the VFR800.

So, you have the round LED headlight and steel tube frame combined with multi-angled lines on the fuel tank and modern elements. Consequently, the bike looks unmistakably “Honda CB” but with a twist.

Hard Parts

The engine is a 250cc, DOHC, four-valve, single-cylinder unit. It produces 27 bhp at 9,000 RPM and 23.3 Nm of torque at 8,000 RPM.

Suspension duties are handled by a pair of upside-down forks up front and a monoshock at the back. ABS is standard.

The instrument cluster is fully LCD, while lighting is LED all-around.

Riding the Honda CB250R

The engine started quickly and was typically Honda quiet and so was the exhaust. The tapered handlebar is rubber-mounted, isolating the engine’s vibes from your hands.

But it was quick-revving. A blip of the throttle sent the bars leaping up the tachometer.

Thinking that since it’s a small capacity bike, I gave it lots of throttle and slipped the clutch to get going. It was totally unnecessary because the engine was surprisingly torque for a 250.

In the city, the CB250R’s acceleration was one of the most important points. However, it never seemed to run out of breath and we never hit the rev limiter, either. One usually needs to possess a left foot like the Riverdance dancers when riding small capacity bikes, but not so on this bike. All you need to do is choose a gear and give it throttle.

Speaking of the throttle, the PGM-FI controlled fuel-injection provided smooth and linear response. That’s a boon especially for newer riders and an advantage for veteran riders to apply gas much earlier while cornering.

The suspension action was pretty good, too. Of course, you’ll feel the deeper potholes and sharper bumps, but that’s because the bike is light at just 145kg (kerb weight).

A good suspension test is by charging into sharp corners at high speeds. The chassis never once protested. Full throttle blasts through sweepers? The suspension didn’t wallow.

This is when you discover the joys of riding a lightweight bike like the CB250R because you hardly need to concern yourself with neck artery popping hard braking. Just charge toward the corner, brake earlier, let go earlier and yell BANZAI!as you turn in. And don’t forget to slam on the throttle on your way out.

Being lightweight also means the bike reacts quickly to braking. The radially-mounted front brake caliper gave plenty of feel at the fingertips.

Out on the highway, we were also surprised at how easy it was to maintain a 120 km/h cruising speed without the engine threatening to grenade itself.

Last but not least, it’s one of the very few bikes that our rear seat reviewer (i.e. my wife) liked. She found the seat and suspension comfortable, besides being easy for her arms to reach the fuel tank.

Conclusion

“Aimed at entry-level and more experienced riders alike” may sound like a misnomer, but the 2019 Honda CB250R does exhibit that kind of attribute.

It’s very simple for beginners to understand and you won’t outgrow it quickly too soon because it can perform whatever you command it to. As for experienced riders, this is one bike which reminds you of the fun and convenience of riding a lightweight bike.

Priced from RM 22,999 (basic selling price and not on-the-road), it’s a worthy buy.

TECHNICAL SPECIFICATIONS

ENGINE

ENGINE TYPE Single-cylinder, 4-stroke, DOHC, 4-valve, liquid-cooled
DISPLACEMENT 250 cc
BORE x STROKE 76.0 mm x 55.0 mm
POWER 27 bhp @ 9,000 RPM
TORQUE 23.3 Nm @ 8,000 RPM
COMPRESSION RATIO 10.7:1
TRANSMISSION 6-speed
FUEL SYSTEM Electronic fuel injection with ride-by-wire throttle
CLUTCH Multiple-plate wet clutch, cable actuation
CHASSIS
FRAME Steel tubes
FRONT SUSPENSION Upside-down forks
REAR SUSPENSION Monoshock
SUSPENSION TRAVEL FRONT/REAR N/A
FRONT BRAKE 2x radially-mounted 2-piston calipers, single disc
REAR BRAKE 1X single-piston floating caliper, single disc
ABS ABS standard
TIRES FRONT/REAR 110/70-R17; 150/60 R-17
STEERING HEAD ANGLE 24o
TRAIL N/A
WHEEL BASE 1,355 mm
SEAT HEIGHT 800 mm
FUEL TANK CAPACITY 10.1 litres
KERB WEIGHT 145 kg

 

  • Harley-Davidson may be famous for heavyweight V-Twin cruisers, but they used to make small capacity bikes, too.

  • The small bikes were result of Harley buying over Aermacchi.

  • Who knows if the Motor Company will produce small capacity bikes again.

Think about Harley-Davidson motorcycles and your mind creates a slideshow of large-sized, heavyweight, iron horses that create micro earthquakes with their signature rumble.

But, did you know that Harley-Davidson actually produced small capacity bikes in their 100+ year old history? Yes, they did. Some worked, some were goofy, but all are gone.

However, there are rumors that the Motor Company will start producing smaller bikes again. The motorcycle buyer demographic has shifted over the years to smaller, cheaper and easier to ride bikes, so the mutterings may turn out to be true.

Let’s take a look at a few of them.

1948 Harley-Davidson S-125

Photo credit Dream Machines

Not everyone could afford and handle a Panhead, so the Motor Company decided to make a more accessible bike. The S-125 was a direct copy of the 1938 DKW RT125 two-stroke. Well, Harley didn’t “copy” the DKW illegally, instead the design was given to the USA a part of Germany’s war reparations.

As such, the same bike is seen as the BSA Bantam in Great Britain, Minsk in the USSR, Yamaha YA-1 in Japan. But it was also produced almost everywhere including Poland and Italy.

1958 Harley-Davidson Topper

Photo credit yesterdays.nl

The Topper was a rebadged DKW. It was powered by a 165cc, air-cooled two-stroke which needs to be started by pulling a cord, like you would a lawnmower. Sold until 1965, the first generation used the “Scootaway Drive” CVT. However, the belt fell prey to road grime and other contaminants, causing it to slip constantly. So, the updated 1961 model came with a sealed final drive.

1961 Harley-Davidson Sprint 250

Photo credit Pinterest

Harley bought an Italian company called Aeronautica Macchi, better known as Aermacchi. The result was a slew of lightweights. The bike was fun, according to classic motorcycle aficionados, but Harley fans didn’t like it.

1966 Harley-Davidson Bobcat

Photo credit Ride Apart

The Bobcat is the successor to the S-125. It had a novel feature of one-piece molded seat, tank and rear fender. Harley didn’t make many Bobcats but its styling influenced the “boattail” Low Rider, XLCR Sportster, Triumph X75 Hurricane and Spanish Bultacos and Ossas.

1971 Harley-Davidson Snowmobile

Photo credit oldmotodude.blogspot

Yes, it isn’t a motorcycle per se, but Harley is a motorcycle manufacturer. The American Machine and Foundry Corportation (AMF) owned both Harley and hence Aermacchi at the time. Besides the boom for mini bikes, the 70’s was also a boom time for snowmobiles. It started out with a 398cc two-stroke, before going up to 433cc. Nearly 10,000 were made by the time it went out of production in 1975.

1973 Harley-Davidson Shortster

Photo credit 2stroke.nl

That isn’t a typo, you read it right – Shortster. It was the Motor Company’s entry into the minibike craze during the time (read: Honda Monkey), besides introducing the brand to kids. Harley’s plan didn’t work, of course. Folks flocked the cheaper and more reliable Monkey.

1974 Harley-Davidson/Aermacchi RR250 Grand Prix Racer

Photo credit raresportbikesforsale.com

Four-time Grand Prix World Champion Walter Villa worked with Aermacchi to develop this 250cc two-cylinder two-stroke. He beat out Yamaha in the Italian GP at Monza in 1974 and 1975.

1975 Harley-Davidson SS350

The SS350 was a two-stroke single, the last from the Harley-Aermacchi venture. Harley’s involvement in the lightweight market was also coming to an end, having being beaten by the Japanese manufacturers.

  • Bikers Kental 2 premieres in all cinemas nationwide on 14thMarch 2019.

  • Zizan Razak, Dato’ Awie reprise their famous roles, with the addition of Datuk’ Afdlin Shauki.

  • The Aprilia RSV4 Factory APRC and Harley-Davidson make their return to the silver screen, along with the addition of an Aprilia Caponord 1200.

The long-awaited sequel Bikers Kental 2 will hit theaters nationwide from 14thMarch 2019.

The movie stars a returning cast from the prequel including Zizan Razak as Bidin Al-Zaifa, Dato’ Awie, Datuk Afdlin Shauki, Meau Julallangtip besides other actors and actresses making their first appearances in the series. Bikers Kental 2 was directed by Mohd Helmi Mohd Yusof.

As the title suggests (it means “Hardcore Bikers” in English), the film combines a view into the lifestyle and brotherhood of Malaysian bikers, and their love to tour including to neighbouring Thailand. The venue moved from Krabi to Phuket for this sequel. Indeed, the movies features snippets of fun activities in Phuket and the hospitality Thais are famous for.

On the motorcycle front, Zizan’s character continues with his trusty Aprilia RSV4 Factory APRC, while Datuk Afdlin rode the Aprilia Caponord 1200. Dato’ Awie rode none other than a Harley-Davidson.

The media were given a sneak preview of the movie yesterday. The film continues with its tried and true action comedy format. Bikers Kental 2 features much improved hand-to-hand combat choreography, vehicle chases scenes and lots of fun.

You can catch it in cinemas nationwide.

  • Zontes Malaysia confirmed launching four new models on 27thFebruary.

  • They are the ZT310-T, ZT310-R, ZT310-X and ZT310-X GP.

  • All four are lightweight but fully equipped with big bike features.

We published an article earlier about the possibility of Zontes making its way to Malaysia. It’s now confirmed.

The new distributor ZONTES MALAYSIA is set to launch four new models on 27thFebruary 2019. The media launch event will be held in Subang, Selangor.

The four models are ZT310-T, ZT310-R, ZT310-X and ZT310-X GP. Details are unavailable at the moment, save for those on the Zontes website. But as almost all motorcycle manufacturers, all four models are built on a single platform.

Basic technical specifications:

  • 312cc, liquid-cooled, DOHC, four-valve, fuel-injected, single-cylinder engine.
  • The engine produces 35 bhp at 9,500 RPM and 30 Nm of torque at 7,500 RPM.
  • Fuel injection management is handled by Delphi, the same folks who supply to Harley-Davidson, among others.
  • The frame uses steel tubes.
  • Front suspension consists of upside-down forks, while there is a monoshock at the back.
  • The ABS system is supplied by Bosch.
  • All-around LED lighting.
  • Electrically-adjustable windscreen (for models with windscreen).

Let’s take a look at the variants:

Zontes ZT310-T

The ZT310-T appears to be an adventure-tourer, equipped with a high handlebar and large windscreen. It also appears to be readily fitted with crash protection bars around the front portion. There is also a large luggage rack at the rear.

Zontes ZT310-R

The ZT310-R is a naked sportbike. Although it looks like a rip-off of the Kawasaki Z900 and Suzuki GSX-S750/GSX-S1000 at first glance, it should appear with its own distinctive features. The most notable feature is the “clean” tailsection. The taillight and turn signals are flush in the tail.

Zontes ZT310-X

The ZT310-X is unmistakably a fully-faired sport-tourer. The handlebar is placed high on top of risers and there is an electrically-adjustable windscreen. It appears sportier with the “stepped” seat which the rider sits low and the passenger higher up.

Zontes ZT310-X GP

This model isn’t listed in the Zontes website. We could only guess that it’s the sportier variant of the X. We’ll find out during the launch.

Stay tuned as we bring you the launch of Zontes. The brand may well shake up the sub-350cc class.

  • Alvaro Bautista and Ducati once again dominated Day Two of the final WorldSBK 2019 pre-season testing.

  • He went faster on the final day, putting his best time way ahead of everyone else.

  • There were four different manufacturers in the Top Five.

Alvaro Bautista and Ducati again dominated the second day of the final WorldSBK 2019 pre-season test.

The Baustista-Ducati Panigale V4 R package had yielded the best time of 1m 30.743s on Day One, being the only rider to dip under the 1m 31s mark. The next fastest rider was Tom Sykes on the new BMW S 1000 RR, nearly 0.6 second behind with a time of 1m 31.300s.

But if the lap time from Day One was unassailable, Bautista put it even further out of reach on Day Two with a blistering best time of 1m 30.303s.

More importantly, that fastest lap wasn’t just one flying lap, proceeded by mediocre lap times. Bautista put in a total of 33 laps in the second session. Of that total, he ran 17 laps in the 1m 30s, 8 laps in the low 1m 31s bracket, while the rest were out laps (leaving the pit), slow down laps (to enter the pits) and in the pits. That is an amazing progression by any count. Bautista also recorded the highest top speed among the field with 314.9 km/h.

This domination is great news for Ducati, who were the King of Superbikes in the 90’s and early 2000’s.

The Top Five of the field actually improved on their fastest laps on Day Two, all dipping under the 1m 31s mark. Tom Sykes was second fastest on the BMW with a time of 1m 30.539s; new Kawasaki signing Leon Haslam finished third fastest with 1m 30.668s; four-time and 2018 champion Jonathan Rea in fourth on the Kawasaki with 1m 30.722s; and privateer Yamaha rider Marco Melandri recorded the fifth fastest time of 1m 1m 30.760s ahead of factory Yamaha rider Michael van Der Mark.

That’s four different manufacturers in the top five. Looks like we have an awesome WorldSBK 2019 season brewing.

Archive

Follow us on Facebook

Follow us on YouTube