Bikesrepublic

Berita Terkini

CKD version of any bikes is always an open opportunity of any riders in any categories as it will make the price of the bike to be significantly lower. This is one in particular, the 2014 Yamaha MT-09, now available in CKD version and the price has been reduced to RM9,000 as it is priced at RM45,000 compared to the CBU version at RM54,000. That is a lot of amount of money that can be used to buy more accessories or performance parts for the MT-09.

Inline-3 engine is the direction Yamaha is taking for this naked street bike. Inline-3 engine will give a benefit in overall lightness of the engine and also making the dimension of the bike to be narrower. The engine can produce 115PS @ 10,000RPM with 87.5Nm of torque @ 8,500RPM. This combination will make the bike easy to accelerate since the engine is powerful and lightweight.  (more…)

wpid-wp-1419054186743.jpeg

Observe closely the poster of the HLYM 2015 lineup and you can see the YZF-R25 on it. We have written about the YZF-R25 earlier in detail after the launch in Indonesia here.
We all already know that it is going to be available in Malaysia next year in Q1. We also have seen it on display at Shell Advance Malaysian Motorcyle Grandprix.
With this poster, we can say everything is prepared for the launch of it next year.

Via: Encik Chao

6
Subang Jaya, 18 December 2014 – It was the fifth day of the motorsports development program by the Ministry of Youth and Sports Malaysia (KBS) alongside PB2R Racing, Pitrides and Malaysian Riders under the flagship of PADU (Program Angkat dan Upaya); which was an initiative by none other than Yang Berhormat Tuan Haji Khairy Jamaluddin. The program which was created with the focus of bringing out the potential of some selected “high risk” youths is now coming to the end of it’s stage following from the program launch in November this year.

(more…)

2015-Yamaha-Exciter-GP-150-RC-005

Yamaha Vietnam has unwraps the cover of the Exciter 150 RC / GP that comes with 150cc fuel-injection SOHC liquid-cooled engine that is the successor of the Yamaha Exciter 135 (135LC in Malaysia, Jupiter MX in Indonesia or T135 everywhere else). There is also a rumor that Indonesia will get this bike with the name Jupiter MX King. There are a lot of improvement of this Exciter RC 150 compared to the Exciter 135. 2015-Yamaha-Exciter-RC150-Vietnam-002

The first objective of this machine is to ‘boost the feeling of power’ and with that in mind the 135cc engine has been increased to 150cc in capacity to enables it to harness more power. It is also said that the project leader for this Exciter RC 150 is the same project leader who handles the Vixion (FZ150i) development project. Reducing power loss also taken into consideration here with the proven technology that is the DiASil cylinder use to minimise the friction. Also here to minimise the friction is the use of the roller rocker arm that are now being extensively in many small bikes.

Yamaha Exciter 150 FI engine

Not suprising to us, is the use of FI system to make sure fuel-efficiency for more milease and accurate fuel delivery in high speed for more power when in need.  The power rating of the Exciter RC 150 is 15.4PS @ 8,500RPM with the torque 13.9Nm @ 7,000 RPM. All these numbers beat the 1st generation Yamaha FZ150i which also 150cc FI bikes. (more…)

1-Shiver 750 CKD_004A top-end model in the product range of Aprilia – one of the most successful brands in world motorcycle racing – is to be assembled in Malaysia as the result of a cooperation agreement between the Piaggio Group and NAZA Premira Sdn Bhd, the sole distributor for Aprilia bikes in Malaysia.

NAZA Premira launched the CKD (Completely Knocked Down) edition of the Aprilia Shiver 750 this morning, as it also announced that it would soon begin local assembly of the model at the NAZA manufacturing facility in Shah Alam in early 2015.

Malaysia will be the first country in which Aprilia has Shiver 750 assembly operations outside of Italy, however these units shall only be made available to the Malaysian market at this point in time. The assembly of the motorcycles will be carried out by NAZA Bikes Sdn Bhd whilst the distribution will be managed by NAZA Premira.

NAZA Premira is optimistic of the market response towards the Aprilia Shiver 750 CKD Edition and estimated to sell at least 600 units in 2015. In fact, the facility in Shah Alam is capable of producing 1,200 units in the initial year of operation.  NAZA Premira is looking to expand the production capacity in between 3,000 to 5,000 units in the long run if it needs to cater to the ASEAN region.  (more…)

masei-robotech-macross-911-helmet

A Robotech (Macross) themed helmet with DOT certified criteria. Coming this 1st January 2015. I remember the anime when I was a kid. Now we all can relive the childhood memories with this helmet.

Price is USD359 (RM1,255) including worldwide shipping.  (more…)

Arkib

Ikuti Kami di Facebook

Ikuti Kami di YouTube