Bikesrepublic

Tesi H2

  • The Bimota Tesi H2 was launched when Kawasaki announced buying 51% of Bimota’s shares.

  • Its engine is based on the supercharged inline-Four in the Ninja H2.

  • These are the early specs of the bike.

Bimota is one company that’s seen more up and downs than a couple whose married for 30 years. It’s gone under a number of times but were rescued time and again. This time, it’s Kawasaki who handed the Rimini-based manufacturer the life jacket. They announced their buying of 51% of Bimota’s shares and unveiled the Bimota Tesi H2 at the 2019 EICMA show.

Kawasaki engines graced Bimotas before in the KB1, KB2 and finally KB3 until 1984. But this time, it’s the Ninja H2’s maniacal supercharged engine turn.

The H2’s engine platform is utilized in different guises and power outputs, ranging between 198 hp to 306 hp (without factoring in ram air) in the race only Ninja H2R. So, according to Bennets UK, the Tesi H2’s engine will be tuned to 228 hp.

The Ninja H2 is already a hefty sportbike at 238 kg, ready to ride. But the effects of the supercharger makes up for the weight penalty. There’s concern about the Tesi H2’s hub centre steering adding even more weight, but it was revealed that the bike will tip the scales at 214 kg, ready to ride. The 24 kg reduction points to the extensive use of carbon fibre.

That front swingarm may add visual length to the bike, but its overall wheelbase is actually 10 mm shorter than the H2’s.

Bimota began flirting with the centre hub steering in the original Tesi 1D in 1990. Developed by designer Pierluigi Marconi as his engineering thesis (Tesi means thesis in Italian). The setup promised to revolutionise a motorcycle’s front end by removing suspension forces from steering. Forks will dive and take up lots of available stroke due to weight transfer, thereby making it difficult to turn under hard braking. Besides that, the front end’s geometry changes as the wheel moves up and down.

The concept sounds great but it produces unfamiliar feel to the rider. It’s also expensive as it doesn’t find widespread use. Still, you can be sure to get everyone’s attention when you pull up on a bike with swingarms on both ends!

The Bimota Tesi H2 is expected to cost twice more than the Kawasaki Ninja H2.

  • Rumours of Kawasaki buying a stake in Bimota turned out to be true.

  • They purchased 49.9% of the shares.

  • The Bimota Tesi H2 made its debut at EICMA 2019.

There were earlier rumours about Kawasaki buying into Bimota and it turned out to be true when they unveiled the Bimota Tesi H2 at EICMA 2019.

It seemed that some time was needed to discover that the Italian Motorcycle Investment S.p.A. who purchased 49.9% stake in Bimota was set up by Kawasaki Motors Europe. In turn, Kawasaki Motors Europe is actually wholly owned by Kawasaki Heavy Industries.

The previous Swiss-Italian owners Marco Chiancianesi and Daniele Longoni still hold a 50.1% controlling stake in what will soon be known as Bimota S.p.A. Operations will remain at Rimini. It was reported that the deal took three years to conclude.

Launched at EICMA 2019, the Bimota Tesi H2 which is a H2 supercharged engine stuffed into the Tesi chassis.

The Tesi is radical that it uses a swingarm for the front instead of forks and hub centre steering. The concept was already explored in the previous Tesi and Tesi 3D. However, the Tesi H2 will be a faired bike instead of the naked 3D.

You can read more about the Tesi 3D and other Bimotas here.

Future bikes will most probably be designated as KB, now that Kawasaki is onboard.

It’s all good news because Bimota have always pushed the enveloped of motorcycle technology, specifically in terms of chassis design, where manufacturers fear to tread.

Archive

Follow us on Facebook

Follow us on YouTube