Bikesrepublic

8 Motorcycle Maintenance Tasks you can DIY

  • Carrying out motorcycle maintenance by yourself is fun.

  • There are many things you could learn.

  • It gives you a sense of achievement and gratification.

Owning a motorcycle is much simpler these days since they are so reliable and require so little in the way of TLC (tender loving care) to keep ‘em rolling. As such, there are certain maintenance tasks that you can DIY (do it yourself).

NOTE: Before we begin, please let us explain that certain DIY maintenance tasks should only be carried out by the manufacturer’s official workshops, especially during the warranty period. For example, something as “mundane” as an oil change must be recorded in the service booklet to entitle for warranty. Do check your owner’s manual and call/email your motorcycle dealer or manufacturer to be 100% sure.

But why carry out these tasks by ourselves, you ask. Well, completing even a simple task as maintaining the drivechain gives a feeling of accomplishment and gratification. You’d also discover more about your bike in the process – and there’s so much to learn! Plus, you’d rise above being just a casual biker to one who is knowledgeable. Seriously, how many bikers actually get down on all fours to inspect their bikes these days?

Okay, let’s start the list.

1. Washing the bike

Photo credit autoevolution.com

This is just way too obvious but cleaning your bike yourself is a good practice and habit. That’s because you’d discover potential problems firsthand. It could just be imagination but everyone I spoke to feels that their bike run smoother after a thorough wash. It could well be true because some of the dirt wedged between moving parts such as the brake pads and disc are washed away.

Our tip is to use reputable cleaners – water soluble and biodegradable ones are the best – rather than corrosive stuff like dish washer liquid and detergent. If you use car shampoo, go for those that are not “wash and wax.” The wax leaves whitish residue on the matt black plastic parts, dulling them out quickly.

You may also consider some automotive waxes. Something light will be good, given the usually thin clearcoat on motorcycle paintwork. Do not apply wax on the matt plastic parts or you’ll be sorry.

As for the plastic parts, consider coating them with UV protector.

2. Oil change

An oil change is one of the obvious places to start. There are a number of things you should always observe:

  • Have the correct oil filter spanner or removal tool.
  • Make sure you straighten the bike to drain the last bits of the old oil.
  • Do not overfill (too much is actually bad for the engine!).
  • Do not overtighten the filter.
  • Dispose of the old oil properly i.e. send it to a workshop rather than pouring it down the drain.

3. Chain adjustment

Always maintain your drive chain properly. That includes proper tension, cleanliness and being lubricated. A loose chain will whack parts of the bike and cause premature sprocket wear. A chain too tight will tax the engine and limit suspension movement. A chain without lube will rob horsepower and increase fuel consumption.

As a personal habit, I usually lube my chain every 400 km which corresponds to two tankfuls of petrol.

4. Battery

As we published yesterday, almost all batteries are now “maintenance free.” However, the term only means that you don’t have to add distilled water from time to time. And that’s all!

We do need to tend to the battery by placing it on a smart charger to keep it charged. I know some will argue that it’s easy to just replace the battery every 2 years or so, but I don’t want to be stuck in the middle of nowhere at night again when a battery went kaput. Plugging in a smart charger will tell you of the condition of the battery, thereby giving you a heads up.

5. Cables

Credit wedginator

This is another oft-overlooked area on a bike, until the cable snaps. Even if it doesn’t, a dry cable will not return fully and leave the clutch slipping (slightly). You can purchase a hydraulic cable oiler or spray a good anti-corrosion agent down the cable tube.

6. Tyres

Ah hah. We’ve plunked in some good money for those bitchin’ tyres and all we do is leave them to die. How sad!

It’s good practice to scrub the sidewalls while cleaning the bike, to reveal their condition. Check the pressure at least once a week. Punctures should be addressed immediately. Don’t underinflate or overinflate.

7. Spark plugs

Spark plugs last so long these days that they can become totally forgotten about since their degradation happens progressively to the extent that we don’t feel a drastic change. But they do need to be replaced.

We admit that replacing the spark plugs for beginners could be a profanity-filled affair that’ll make Samuel L. Jackson blush, but you’ll discover so much when reaching into the nether regions in the engine compartment. You’ll see the airbox, recirculation valve, throttle bodies, the ignition coils, etc. etc. on your way to spark plug cavities in the valve cover.

8. Keyholes

Oh yes, do lube the keyholes. You don’t want to ride somewhere far only to discover that you could get the fuel tank cap to open up! (This writer found out firsthand and had to call a recovery service!)

BONUS

The next two can be performed easily but they are best left to trained mechanics. They can be life-threatening if done wrongly.

9. Coolant

The engine coolant is also another oft-neglected item. (See the ironic side of reliability?)

Depending on manufacturer, it should be replaced every two years, but this writer will change it as soon as it starts to turn milky.

The thing to remember here is to flush the cooling system of air pocket by running the engine and letting it pump out the air. The mistake is closing up the drain plug and pouring in the coolant without bleeding, leaving behind air pockets that will lead to overheating.

10. Brake pads

This job is super easy actually. The most important precaution is to reinstall the brake pad retaining pin properly. Your life and bike depend on that piece of pin!

Wahid's lust for motorcycles was spurred on by his late-Dad's love for his Lambretta on which he courted, married his mother, and took baby Wahid riding on it. He has since worked in the motorcycle and automotive industry for many years, before taking up riding courses and testing many, many motorcycles since becoming a motojournalist. Wahid likes to see things differently. What can you say about a guy who sees a road safety message in AC/DC's "Highway to Hell."

Related Articles

Archive

Follow us on Facebook

Follow us on YouTube