Bikesrepublic

Latest News

As we posted earlier, Lambretta is making a comeback to Malaysia and it has since showed lots of interest, not to mention sparking nostalgia among ex-Lambretta owners and fans. In fact, my late-Dad rode a Lambretta in the 60’s and he was like a rock star among his peers!

However, one comment had us thinking too. “Is the engine made in China?” one of our followers asked.

So, we decided to do some digging.

The beginning and peak of Lambretta

Let us start with the history of Lambretta, because we do not know where we are and where we are going if we do not know where we have been. 

Italy was in ruins after World War 2, and her people were looking more affordable forms of transportation. Vespa was the first to recognise the opportunity and began in 1946. A year later, Dr. Ferdinando Innocenti who owns an iron and machinery works in Milan which made steel tubings, realised that it was indeed a great time for his firm to profit. He ordered his technical staff to design a two-wheeled vehicle to be produced at a low cost.

Instead of going the Vespa route, the Innocenti staff drew inspiration from the Cushman Model 53 foldable scooters used by American and British airborne troops when they landed in Italy during the war. Hence the single downtube frame to which  everything else is connected to.

Now they needed a name and in the age-old Roman/Italian fashion, they chose one after the mythical water sprite that lived in the Lambro river near where the company was located. Lambretta was born.

This was the age of pioneering engineering and manufacturers looked for distinguishing features rather than copying and pasting them like they do these days. Again, Lambretta did not want to follow Vespa’s methods, such as connecting the engine directly to the rear wheel. Instead, they sent the engine’s power through a three-speed gearbox and a sealed oil-bath chain. The engine and gearbox were placed along the frame’s axis.

This designed was what started Lambretta’s success and their fan’s fierce rivalry with Vespa. Lambretta riders mocked Vespa’s off-centre construction (the engine’s to one side) which made them “look like sailboats.”

So, to make the story short, Lambretta released several groundbreaking models such as the LD in 1950, followed up by an evolved LD in 1951, and the LI series which began in 1958 until 1973.

Other great Lambrettas include the 175 TV Series 3 which became the first scooter equipped with a disc brake in 1962.

The peak of the Innocenti company was the 1969 with the 200 SX 200/200 DL Electronic, which featured electronic ignition, disc brakes, and an 11 hp 200cc two-stroke single. It was the most powerful engine in a scooter at the time. Heck, even the current 2024 Ysuku (Yamaha Y15ZR) does just 15 hp.

The decline of Lambretta

The brand actually outsold Vespa for many years but ran into a crisis when cheap cars such as the Fiat 500 started becoming more prominent.

Vespa, on the other hand, weathered this critical juncture partly due to aggressive marketing and unchanging image. Lambretta sought to market their bikes as more sophisticated and upscale products and even hired Italian designers such as Bertone (who designed Ferraris, Lamborghinis, Lancia, Citroën, amongst other famous marques) to refine their bikes. However, this only added costs, while the majority of buyers were still seeking cheap modes of transportation.

Innocenti sells Lambretta

The production lines to the Indian government, who in turn created Scooters India Limited (SIL), who used the Lambretta name until 1998. SIL produced the LI 150’s derivatives, Lamby and GP150 for export. We have seen many Lamby in classic Bollywood movies.

SIL then sold Innocenti to BMC (British Leyland), who began producing the Mini in Italy, shortly after. The Italian market responded positively, and BMC planned huge investments to increase manufacturing capabilities.

But it did not occur to BMC that Fiat is the taikor (big brother) in Italy, which had the Italian government blocking BMC’s projects. As such, BMC Innocenti went bankrupt.

The company’s assets were transferred to one Alessandro de Tomaso who had connections in the Italian government. Yes, the very same Tomaso of the legendary De Tomaso Pantera. However, just as other de Tomaso firms, Lambretta suffered and was shut down for good.

Lambretta has a new owner

The following years saw the Innocenti and Lambretta brands going around from one court to another embroiled in the fight for ownership.

Finally, a longtime Ductch Lambretta owner and investor Walter Scheffrahn got hold of both brands. He went on to establish a new operative headquarters called Innocenti SA in Lugano, Switzerland. Innocenti SA finally launched three Lambrettas, the V50, V125, and V200 in 2017 that received success in Far East markets.

This led to a partnership with Thailand’s Gaoking company. So, to answer our readers: the current Lambretta’s headquarters in Switzerland is home to their R&D department under Scheffrahn’s personal control and leadership. The Thai partners are in charge of manufacturing.

Lambretta Returns to Malaysia

26 motorcycles were destroyed while another 10 were damaged due to a fire at the UniMap hostel early this morning.

Almost all the motorcycles were owned by students of Universiti Malaysia Perlis (UniMAP) and were parked in the basement of a dormitory block in Pauh Putra.

The incident is believed to have happened at 4.41 am at Block B, Pauh Putra Housing Complex (Residential College).

A spokesman for the Malaysian Fire and Rescue Department (JBPM) Perlis said that a total of six members led by Senior Fire Chief II, Megat Zairilnizam Ahmad from the Arau Fire and Rescue Station were deployed to the scene of the incident.

“When we arrived at the scene, we found that the fire had spread and destroyed and damaged 36 motorcycles parked there.

“Criminal investigation officers have already visited the scene for a preliminary investigation,” he said.

A victim of the incident said he was woken by a friend while he was sleeping who said that their dormitory block was on fire. “I live on the fifth floor. When my friend said there was a fire, I thought this dormitory block was on fire.

“So I took whatever items I could salvage including a laptop downstairs but when I stepped down, I saw my motorcycle, a year-old Yamaha Y16, engulfed in flames.

“I was unable to do anything to save my motorcycle because the situation there was hot and the fire was raging and I estimated the loss to be RM14,500,” he said.

His friend, Muhammad Muaz Mohd Sofi, 25, also did not have time to do anything to save the Honda RS150 motorcycle that he had been using for more than five years when the fire spread quickly.

Three-time MotoGP world champion Jorge Lorenzo said Malaysia needs motoring schools for two wheels to develop talent to compete competitively on the global stage one day.

Lorenzo said the schools needs to be guided by some former champions and also to organise a series of championships to discover and further develop talented riders.

“I think Malaysia and Indonesia need this school with some champions who can share their experiences and organise some championships for children.

“Only with this, they can improve because the organisation of the championship is not very strong and there is no champion who can give advice to the children,” said Lorenzo who is also the ambassador of the electric motorcycle brand Vmoto Brand, on last Wednesday.

Malaysia at the time is seen to be on the right track to produce good riders with grassroots programs such as the Malaysian MiniGP Series Championship run by former rider in the World Motorcycle Championship, Zulfahmi Khairuddin.

Is there a waterproof rating for rain suits? Or do we just trust the maker? Or do we keep changing them until we find one that works? And NO, THIS IS NOT A PAID OR SPONSORED ARTICLE.

We admit, buying a motorcycle rain suit is not an easy task, especially when every maker claiming to make the best rain suit, usually along the lines of being “fully waterproof” and “breathable.” Just head to online shopping platforms such as Shopee and Lazada and you will see what mean. (And we have not begin to touch on fake ones yet.)

So, back to the question: Is there such a rating? Well, yes.

Fabric waterproof ratings
Waterproof Rating (Water column in mm)  Level of water resistance Conditions
0-5000 mm No resistance to some resistance to moisture. Light rain, no pressure.
6000-10000 mm Rainproof and waterproof under light pressure. Light rain, light pressure.
11000-15000 mm Rainproof and waterproof except under high pressure. Moderate rain, light pressure.
16000-20000 mm Rainproof and waterproof under high pressure. Heavy rain, some pressure.
20000 mm+ Rainproof and waterproof under very high pressure. Heavy rain, high pressure.

Please refer to the table above.

So, the higher the water column rating, the more waterproof that fabric is.

“Pressure” as described above is the force which presses the water column against the fabric, which simulates wind. This is why certain rain suit and/or winter clothing makers specify their fabrics’ waterproof rating in PSI (pressure per square inch). The conversion rate is 1 psi = 704 mm of water.

How is the fabric tested?

The technical term is hydrostatic pressure test.

First, there is a reason why the rating is called “water column.” It refers to a vertical tube filled with water and graduated in mm, thus resembling a column.

Photo from nwt3k.com

A piece of fabric is pulled taught, like the skin of a drum, and the tube is placed on top of it. Water is then added into the tube until its pressure permeates through the fabric.

For example, if water starts to permeate at 3250mm, that particular fabric has a waterproof rating of between 0-5000mm, hence it is somewhat resistant to water and suitable for very light rain.

Photo from nwt3k.com

Simple so far.

Problem is…

However, not all manufacturers publish their rain suits’ rating. There are those who mimic (ahem) or utilise the same materials used by other manufacturers to create their own.

There are several resulting eventualities here:

  • A rain suit that has no waterproof rating, but is really waterproof due to good materials and design. You will be surprised to find certain branded rain suits that are rather thin and light yet offers great waterproofing and lasts for many years.
  • A rain suit that not only lets water in, but it is as much water as not wearing a rain suit. It could be due to a bad design such as no velcro seal, no “rain channel” to cover the jacket’s zipper, or bad seam seals (especially in the crotch area), or bad materials, or the combination of any or all these factors. And good luck trying to get your money back from the Shopee seller you ordered from!
  • But… there are also manufacturers who actually tested their rain suits yet they leak like a sieve. Clock these up to bad design and materials.
So how do we know?

The best bet, unfortunately, is to experiment with rain suits from several brands. Our favourites thus far are from RS Taichi and Komine. The former does not have its waterproof rating published, while the Komine’s level is 32000mm. They are light, long lasting, breathable, and very waterproof. NO, THIS IS NOT A PAID ARTICLE, instead it is from our own experiences of having owned several rain suits.

Rumours, half-truths, even outright lies are rife in social media these days, because people love controversies, and that drives views and engagement. And the main problem is trying to distinguish between genuine and fake news, at least until the relevant party clears the air. Such as allegations that BYD will be making motorcycles. So no, BYD is not making motorcycles.

Rumours began circulating of a “BYD electric motorcycle” when an unofficial video was published in social media. The video also highlighted the cost savings of owning a BYD motorcycle.

That prompted the company to reply formally, with the General Manager of the Brand Public Relations Department of BYD Group, Li Yunfei, stating that the bike does not exist, nor being developed. He also stated unequivocally that any “news” of BYD developing any form of two-wheeled vehicle as “all false.”

It is not to say that BYD does not have the experience with electric motorcycles.

Scorpio Electric Model X

BYD signed an agreement with Singaporean brand Scorpio Electric back in July 2023 to assemble the former’s electric scooter called the X1 for the Chinese market. However, the X1 does not use BYD’s LFP battery, and utilises Samsung’s powerpack, instead.

Going further back to 2022, BYD developed and supplied LFP batteries to the Spanish motorcycle maker Nerva for their Nerva Exe E-Scooter (main picture).

Yes, that is correct: BYD also supplies batteries to several automakers, as well as other industries, and are researching and developing safer batteries for motorcycles.

BYD is now one of the largest vehicle manufacturers in the world, and especially in the electric vehicle (EV) sector. Their meteoric rise has caught out several manufacturers, including Tesla who saw their sales slide worldwide, causing the American company to conduct a massive layoff recently. It is perhaps not surprising to see some folks who get over-excited at the prospect of BYD making motorcycles.

Motorcycle manufacturers can now breathe a little easier. For now.

Ever wondered why KTM has not produced another fully-faired road-going sportbike since the RC8 ended production post 2010? It was because the CEO of KTM thought that sportbikes are getting too fast and they wanted to be responsible for rider safety. Yet, they produced the absolutely mad Super Duke supernaked. Well, nevermind that because here comes the KTM 990 RC R sportbike for the streets!

That is the great news because the RC 8C was a limited run unit for the track only, to the consternation of many KTM fans. On the other hand, the KTM 990 RC R sportbike is fully confirmed by KTM themselves, with Riaan Neveling, Head of KTM Global Marketing issuing a statement:

“The KTM 990 RC R is a groundbreaking innovation for those who live for the thrill of cornering. It’s for those who lean close to the road, almost brushing their knees, and then push the limits, dragging elbow to the tarmac on the racetrack. This bike offers power and prestige without the exorbitant price tag. At last, we can unveil our KTM 990 RC R and introduce a truly exceptional motorcycle to dealerships in early 2025, fulfilling the anticipation of countless riders and race enthusiasts. Our DUKE Range and other Street products have garnered a loyal following for their distinct character; we believe the KTM 990 RC R will quickly attain cult status because it excels at the two things it was designed for so remarkably well.”

Although the prototype (and rider) here wears a dazzle camouflage, the bike’s shape is strikingly similar to the KTM RC16 MotoGP race bike, and that of the RC 8 R’s, too. Hence a fuel tank designed to provide great support while cornering. Peeking through the fairing is part of the steel trellis frame, mated to a curved swingarm.

While there is not much technical details, it is not a full monty sportbike as the numbers suggest. “990” should mean the new bike shares the same engine as the KTM 990 Duke R. What that means is 126 hp and 103 Nm of torque.

Still, the bike looks lithe and we hope for a favourable power-to-weight ratio, although do not hope to chase down 200hp, 1000cc superbikes.

The KTM 990 RC R will be revealed in 2025 so cross your fingers and start saving now.

Archive

Follow us on Facebook

Follow us on YouTube